Audited Supplier
0.71 mini
AMOLED
Consumer Electronics
Mipi Only or Mipi+I2c
16.7m Colors
1920 X1080
1000CD/M2
jinzhaohui
Carton
Glass electronic products of 0.71" display
China
8524919000
Product Description
0.71 inch diagonal, FHD resolution (1920 x1080), active matrix color
OLED (Organic Light Emitting Display)panel module based on single crystal silicon backplane . The pixel circuits
and driving IC are integrated on the silicon backplane to get the compact size and very low power consumption..
| item | Specification data |
Small-size | high resolution 0.71" FHD Display |
Potential applications | Virtual Reality application(AR/VR), Head mounted displays, Near-Eye Displays etc. |
AP Operated Resolution | 1920 x 1080 up to 90Hz |
Full color mode | 16.7M colors |
MIPI Differential Input | CLKP,CLKN DATAP0,DATAN0 DATAP1,DATAN1 DATAP2,DATAN2 DATAP3,DATAN3 |
When Reset happens in Sleep-out mode, the driver IC will enter blanking sequence with the maximum time 120 msec.
Then driver IC will remain in blanking state and return IC's default state. During reset complete time (tRT), data in OTP
will be re-loaded and latched to internal registers. This data re-load is done every time when there is an H/W reset and
completes within 20 msec after the rising edge of RESX. Therefore, it is necessary to wait at least 20 msec after releasing
the RESX before sending commands. Moreover, the Sleep-out command cannot be sent in 120 msec. Spike (less than 20ns
width) Rejection can also be applied during a valid reset pulse.
Reset time @ VDDI=1.65V to 1.95V, AVSS=VSS=MVSS=0V, Ta=-40°C to 85°C
