Audited Supplier
M
Fixed Resistor
Shunt Resistor
DIP Resistor
Matel Oxide Resistor
Surface Mount
Photoresistor
Single Connection
Square
Linear Scale
Television
Liwang
ISO14000
ISO9001
RoHS
liwang
Box
ISO14000, ISO9001: 2008
Jiangsu, China(Mainland)
8533900000
Product Description
Milliohm Sampling Shunt Resistor for meters
Electric data
Physical data:
Performance data:
Strength:
1. Good material, sampling resistance precision and stable.
2. Various type.
3. Good service: Make according to customer requirement.
4. The hole is suit for two size screw.
Product Description:
1. Modle type: Shunt Resistor For Electicity Meter 250 micro ohm
2. Material: 6J13 manganin and pure copper(reach the country GB614599 F2 standard)
3. Shunt welding mode: Electric Beam Welding
4. Resistance value tolerance: ± 5%
5. Shunt type: The shunt should be mountable type with holes for screw fixing
6. Termination: Integrated lead wires are available
7. Temperature: Independent from temperature variation with low TCR value,
8. Characteristics: TC < 50PPM/K
9. Aging: 10 hours under 120 deg.
10. Power loss: 50 milli watt
Electric data
Rated power(W) | Resistance(mΩ) |
| 2 | 10-20 |
| 3 | 5-10 |
| 4 | 3-10 |
| 5 | 3-10 |
Physical data:
The resistors have many differrent types. | ||
Name | Picture | Features |
M type | To increase the resistance, some resistance can be made of folded handle, a M-type or other shape, and will not produce too much inductance. In order to satisfy the customers ,this type of resistance presser foot treatment, so the resistor are easier to position in the circuit board . | |
Thin wire | ||
Performance data:
| Conditions | The largest percentage change in resistance ΔR% |
Work at 25 for 1000 hours at full load | 1% |
place in 100 hours in wet conditions | 1% |
At -40 ~ +150 temperature cycle 1000 | 1% |
Strength:
1. Good material, sampling resistance precision and stable.
2. Various type.
3. Good service: Make according to customer requirement.
4. The hole is suit for two size screw.
Product Description:
1. Modle type: Shunt Resistor For Electicity Meter 250 micro ohm
2. Material: 6J13 manganin and pure copper(reach the country GB614599 F2 standard)
3. Shunt welding mode: Electric Beam Welding
4. Resistance value tolerance: ± 5%
5. Shunt type: The shunt should be mountable type with holes for screw fixing
6. Termination: Integrated lead wires are available
7. Temperature: Independent from temperature variation with low TCR value,
8. Characteristics: TC < 50PPM/K
9. Aging: 10 hours under 120 deg.
10. Power loss: 50 milli watt
