Mineral Water Bottle Blow Moulding Machine

Mineral Water Bottle Blow Moulding Machine

Plastic pet bottle blowing machine/mineral water bottle blowing machine

I. Brief Introduction of PET bottle blowing machine :
FG4 series fill the gaps in the domestic high-speed linear blowing machine. Currently, domestic single-mold speed of linear blowing machine still stay around 1000BPH, while international max single mold speed has reached 1800BPH.

FG series blowing machine are equipped with automatic perform loading and unloading system. The machine is applicable for all shapes of drinking water bottles, carbonated bottles and hot filling bottles. FG4 is composed of three modules: prefrom elevator, perform unscrambler and host machine.

II. Technical Features of PET bottle blowing machine :
1). High Speed: 6500-8000BPH (4-cavity).
2). Less Space consumption: Machine is highly integrated, the construction is highly compact.
3). Less electricity consumption: performs intercept is shorten to the minimum, compared with common
4).blowing machine 30% electricity can be reduced.
5). High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
6). High Quality: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
7). No Contamination: Closed production zone, good self-lubrication system avoid contamination.
8). High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.

Servo driving and cam linking blowing section: 

The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement.

equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.

Small performs distance heating system:

Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30% electricity consumption.

Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.

Efficient and soft perform inlet system:

By rotary and soft preform inlet system, the speed of prefom feeding is ensured meanwhile, the preform neck is well protecte

Modularized design conception:

Adopting modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts.

Exploded bottles ejection unit:

During the blowing process, if the bottle burst, bad bottles can be automatically removed.

This prevents the bad bottles from entering the filling machine.

HP air recovery system:

After the bottle blowing, high-pressure air can be recycled and used again for the pre-blowing and machine physical movement.
 

Oven and preform temperature detection system:

Detection system detects temperature of oven and the temperature of performs.

When the preform temperature does not reach the set blowing temperature, blowing workstation will alarm, not blown.

Equipped with remote monitoring system:

Engineers in China headquarter can check the data collected and sent by the PLC anytime with the mobile ,feedback will informed to  the client's site if something abnormal ,give the machine 24 hour'baby care in the cradle.

 
Configuration

Jiangsu Faygo Union Machinery is a professional manufacturer of plastic machines.
It occupied an area of 18000 square meters. With years of development,
its products covers plastic extrusion lines,plastic blowing machine, plastic recycling machine, air compressor etc. 

Stick to the company idea is making good machine, being good person,
Faygo Plast alwasy provide customers with high quality machines.

Warmly welcome to visit our factory (next to Shanghai)!