Switch Solution
Modular guest room intelligent control system
core is the RCU (guest room intelligent controller), which is based on cloud platform architecture. Security system, lighting system,
audio and video system, air conditioning terminal, curtain motor, room service, and other intelligent management and control systems
are all available in hotel rooms. Environmental quality and customer experience are enhanced to achieve the goal of "green and energy
saving, management efficiency, intelligence and fashion".

Scope of application

02. Modularity can be freely combined and installed, which can meet the different needs of the hotel.
03. Configuration instructions of the modular guest room intelligent control system: The power module/gateway module is a must-configured
module.
04. The chassis is stamped from 1.2MM high-strength cold-rolled steel plate.
05. Various dimming modules and relay modules can be selected as needed, and any circuit can be defined as the desired function.
06. The main chip uses ARM structure processor and Freescale 32-bit chip. It has low heat, long service life, and fast processing.
07. This can be connected with the third-party hotel management software and achieve linkage control. It can also be used to connect door lock,
background music, safes, card plug electrical appliances, infrared detectors, and other equipment, depending on the demands of the customer.
08. It can support 128 485 communication devices to work together, and has been connected to most of the 485 switches and temperature controls
on the market, as well as various voice devices.
09. Networking interface: fully support TCP/IP protocol standard Ethernet interface. It has a high bandwidth and communication rate, so there will be
no data jams.
10. The ability to control software on a mobile phone is supported. Room lighting, curtains, air conditioner, and service information management are
all managed by software.
11. Remote editing: independent design and development of embedded systems along with remote editing, and remote update.
12. Support online download procedures. There's no need to remove the chip to burn it. It's easy to change programs.
13. The terminal post is designed with a cover to increase security.
14. Pluggable wiring terminal for easy installation.


01. High security
02: Strong Expansibility


03: High Degree of Intelligence
04: High Stability

Product size diagram
Supply voltage | Honeycomb power supply with wide voltage input (100~240v) No load power consumption <0.3w, overvoltage and overload protection |
Strong current circuit | 11 channels 220V /16A. AC output (for lighting/curtains); 4 channels 10A relays; 3 channels 220V /16A. AC output (For coil air conditioning, high, medium and low wind speed control); 2 channels 220V /10A. AC output (For coil air conditioner cooling and heating solenoid valve control); 1 channels 220V /30A. AC output (for controllable socket); 2 channels 220V /1A. AC SCR voltage regulation dimming output |
Weak current circuit | 28 channels weak current backlight control output (check in/stand by/clean up/do not disturb/doorbell). 32 weak current dry contact control signal input (door sensor, doorbell, infrared sensor, card, water flow sensor, etc.). |
Extensibility | Support 6 way strong current expansion and 16 way strong current expansion Support various dimming extensions Support 8 way weak current dry contact extension |
Background functions | Remote control, timely synchronization, remote upgrade of bottom layer and configuration, batch download |
Support peripherals | The response speed of 485 interface is within 300ms, and it can handle 485 equipment such as temperature control, infrared forwarding, switch and motor; It can support 128 pieces of 485 communication devices to work together and various voice devices |
protective measures | 2 way fuse |
Bus port | 1 channel RS485 interface, 32-way dry contact interface |
Network mode | TCP/IP network interface |
Controlled socket | 30A max, recommended to be equipped with AC contactor |
Air conditioning control | 2 way air conditioning control interface (cold water valve, hot water valve;) |
Chassis size | 460mm*350mm*80mm (length, width and height); Chassis size can be customized according to project requirements |
Product weight | 4.4kg |
Hotel Room Intelligent Control System Composition Diagram
* All control panels of the guest room (including lighting control, air conditioning, dimming, service control, etc.)
* Guest room door display, energy-saving switch, doorbell, door magnetic, infrared, etc.
* Network supporting (including selected 485 bus or TCP/P Ethernet) products and computer equipment.
* Collect all guest room information and send information intelligent system software.
* Apple Ipad, PHONE, Android phones and tablets, visitor image display lights.
information(check in /SOS/ service/clean up, etc.) and modify the debugging background. The front desk computer simply needs to access a web page; no other software needs to be installed, and the room dynamic can be checked instantly.