Audited Supplier
DCEM-5MC
1 Year
1 Year
Digital
Direct Connected
Meter for Industry and Home Use, Standard Electric Energy Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters
Three-phase Four-wire
Electronic Meter
Terminal
Continuous Wave
Energy Meter
RoHS, ISO, CE
Customized
-10~55c
0-999999
Single Phase
Digital Only
96*96mm
0.5
220V
Blue Jay
Carton
10*10cm
Chongqing, China
Product Description
DCEM-5MC dc meter is an advanced solution for multi-channel energy metering in DC system. It can visually display voltage, current, power data and energy cumulative data. With a panel keypad, it can set voltage display parameters and the hall CT parameters.Furthermore, with RS485 communication interface, BJ-DCEM dc meter electric digital can be connected to the monitoring center. The DC din rail energy meter is a high-performance automatic meter suitable for industrial and mining enterprises, civil construction,building automation. And also these series can measure the power parameters in power grid.
* High accuracy:0.5
* View real-time data instantly on the multi-
function display
*Modbus-RS485 communication interface
*Optional 2-way digital output and 4-way digital input
* Optional 1-channel configurable energy pulse output function
* Different Hall sensors can be selected
*High security: high isolation voltage, withstand voltage up to AC2000V
*4 kinds of tariffs and 12-period electric energy time-of-use metering can be selected
*Collect 1 channel of DC parameters (Hall sensor can be extended to 4 channels at most), including voltage, current, power,energy
and other electrical parameters
*Optional timing independent accumulative electric energy storage (255 hours, 63 days, electric energy freezing in December)
*Intuitive display, Chinese LCD display real-time measurement data and configuration parameters, which is convenient for on-site
installation and debugging
*Easy installation and simple wiring: 35mm standard DIN rail installation, convenient for on-site installation and wiring
* View real-time data instantly on the multi-
function display
*Modbus-RS485 communication interface
*Optional 2-way digital output and 4-way digital input
* Optional 1-channel configurable energy pulse output function
* Different Hall sensors can be selected
*High security: high isolation voltage, withstand voltage up to AC2000V
*4 kinds of tariffs and 12-period electric energy time-of-use metering can be selected
*Collect 1 channel of DC parameters (Hall sensor can be extended to 4 channels at most), including voltage, current, power,energy
and other electrical parameters
*Optional timing independent accumulative electric energy storage (255 hours, 63 days, electric energy freezing in December)
*Intuitive display, Chinese LCD display real-time measurement data and configuration parameters, which is convenient for on-site
installation and debugging
*Easy installation and simple wiring: 35mm standard DIN rail installation, convenient for on-site installation and wiring
Model | DCEM |
Accuracy | Current:0.5%fs |
Voltage: 0.5%fs | |
Active power:1%fs | |
Energy:1%fs | |
Input | Current: Hall Effective CT, aux +/-15VDC,4V signal input |
Load | Current:<0.5VA/phase (rated 5A) |
Overload | Current:1.2 times rated continuous; 1 second for 10 times the rated |
Voltage:1.2 times rated continuous; 10 seconds for 2 times the rated | |
Dielectric strength | IEC/EN 61010-1:2010 |
2kV AC RMS 1 minute, between input/ output/ power supply | |
Operating environment | Temperature: -20~60 |
Humidity: 20%~95%RH (No condensation) | |
Storage conditions | Temperature:-25~70 |
Humidity: 20%~95% | |
Protection | Panel: IP40 |
Power supply | 85~265VDC/AC 20-60VDC (Optional) |
Maximum power consumption 4VA | |
Dimensions | L x H x D :87.3mm x 132mm x 46.5mm (with wiring terminal) |
