Audited Supplier
PCTFE
PCTFE
High-Performance Plastics
<0.00
35-50
2.1-2.16 g/cm3
78~80
50%-100%
38~48MPa
1.45~1.6gpa
HIGHDOM
Export Carton, Pallet
PCTFE
China
3902900090
Product Description
Product name
In stock M300h M400h PCTFE tube, rod and sheet manacturer for gasket, seal and mechanical parts
Main properties
. Excellent low temperature resistant
. Good mechanical property
. Low coefficient of liner expansion
. Good dimensional stability
. Good penetration function
Application
PCTFE is widely used for seals in the condition of low temperature with high pressure(gas,liquid nitrogen,liquid oxygen ect.)
semiconductor,chemical , pharmaceutical, aerospace and other televent sealing area.
Technical specification
Products available
Product pictures
Company introduction
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry, semiconductor, gas&oil, pump&valve, water treatment...
Delivery way
In stock M300h M400h PCTFE tube, rod and sheet manacturer for gasket, seal and mechanical parts
Main properties
. Excellent low temperature resistant
. Good mechanical property
. Low coefficient of liner expansion
. Good dimensional stability
. Good penetration function
Application
PCTFE is widely used for seals in the condition of low temperature with high pressure(gas,liquid nitrogen,liquid oxygen ect.)
semiconductor,chemical , pharmaceutical, aerospace and other televent sealing area.
Technical specification
| Property | NORM | VALUE |
| Density | ISO1183 | 2.1-2.16 |
| Tensile strength at break ( Mpa) | ISO527 | 35-50 |
| Modulus of elasticity | ISO527 | 1.45-1.6 |
| Elongation at break | ISO527 | 50-200 |
| Shore D | DUROMETER | 78-80 |
| Temperature range | / | -254-120 |
| Coefficient of linear thermal expansion | ISO11359 | 0.6 |
Products available
| Diameter ( unit: mm) | length 1 (unit: mm) | length 2 ( unit: mm) |
| 3.0 | / | 1000 |
| 4.0 | / | 1000 |
| 5.0 | / | 1000 |
| 6.0 | 200 | 1000 |
| 7.0 | 200 | 1000 |
| 8.0 | 200 | 1000 |
| 10.0 | 200 | 1000 |
| 12.0 | 200 | 1000 |
| 13.0 | 200 | 1000 |
| 15.0 | 200 | 1000 |
| 16.0 | 200 | 1000 |
| 18.0 | 200 | 1000 |
| 20.0 | 200 | 1000 |
| 22.0 | 200 | 1000 |
| 25.0 | 200 | 1000 |
| 30.0 | 100~500 | 1000 |
| 35.0 | 100~500 | 1000 |
| 40.0 | 100~500 | 1000 |
| 45.0 | 100~500 | 1000 |
| 50.0 | 100~500 | 1000 |
| … |
Product pictures
Company introduction
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry, semiconductor, gas&oil, pump&valve, water treatment...
Delivery way
