New Technology 500L/H Osmose Reverse Water Systems Water Treatment Machinery

Reverse osmosis process uses semi permeable spiral wound membranes to separate and remove dissolved solids, organic, pyrogens, sub micron colloidal matter and bacteria from water. Feed water is delivered under a pressure of approximately 7-10/cm2 through reverse osmosis membranes. Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% bacterial in the feed water.

*Raw water Range we can do: Brackish water TDS less than 1000ppm, ground/well water, city water,rains,river/lake water ... or according to customer's requirements

*Capacity we can do;500lph,1000lph,2000lph,3000lp...50000lph,or according to customer's requirements

*Output water application:drinking/irrigating water, commercial bottled selling water,human consumption drinking water...or according to customer's requirements

low Chart Of  RO Water Treatment Machine

Raw water pump - Sand filter - Carbon filter -Cartridge filter - High pressure pump- RO membrane host-RO membrane-UV -Ozone
1. Raw water supply pump
2. High-pressure pump
3. Reverse Osmosis Membrane: 
4. Pre-treatment device
5. Conduit: To use PVC
6. Electric standard configuration: PLC automatically control
7. Electrical components: To use Zhengtai's and Sch**der's products
8. Frame: To use stainless steel.