Audited Supplier
TPS33M-600W-M3
Minimum Altitude
Ultra Short Range
Small
Industrial
Unmanned Rotorcraft
600W
800W
Rosefinch
Carton Box
China
8504401500
Product Description
New Tethered Power System With Output 600W for DJI Mavic 3 Enterprise Drone
1, Typical characteristics
4). The onboard power supply has a constant voltage output, and the backup battery has no charging or discharging phenomenon throughout the entire process, without losing power or causing hidden damage.
2, Adapted to DJI M3 drone
1. Support flight duration: ≥ 12h.
2. Support flight altitude: ≥ 30m (tied cable 33m, reserved safety length).
3. Optional lighting group: 200W (JM200).
3, Functional characteristics
1. Wire winding function: Passive wire reel out, long press the button to automatically winding, and manually winding in case of power loss.
2. Protection function: Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, over temperature protection, fault elimination and self recovery.
3. Fault alarm function: The system fault alarm light flashes red and beeps to alert.
4. System equipment portability: With a backpack design, the backpack can be equipped with a complete tethering system that includes a tethering box, onboard power supply, lighting unit (optional), and other accessories. The overall weight is 5.0 ± 0.2kg.
4. Parameters:
1. Unless otherwise specified, the above data are all tested at Ta=25 ºC, humidity<75%, nominal input, and rated load.
2. Due to space limitations, there is incomplete data in the table. If necessary, please contact our sales personnel to obtain it.
1, Typical characteristics
1). It is small in size and light in weight, with a tethered box weighing only 3.6kg. It is easy to carry with a backpack for storage.
2). Replace the Primary battery, without changing any structure of the UAV, and seamlessly switch between tethering or releasing.
3). The operation is simple, and the entire process of drone takeoff and landing does not require the operation of the mooring box. The button type take-up function is also available.
4). The onboard power supply has a constant voltage output, and the backup battery has no charging or discharging phenomenon throughout the entire process, without losing power or causing hidden damage.
2, Adapted to DJI M3 drone
1. Support flight duration: ≥ 12h.
2. Support flight altitude: ≥ 30m (tied cable 33m, reserved safety length).
3. Optional lighting group: 200W (JM200).
3, Functional characteristics
1. Wire winding function: Passive wire reel out, long press the button to automatically winding, and manually winding in case of power loss.
2. Protection function: Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, over temperature protection, fault elimination and self recovery.
3. Fault alarm function: The system fault alarm light flashes red and beeps to alert.
4. System equipment portability: With a backpack design, the backpack can be equipped with a complete tethering system that includes a tethering box, onboard power supply, lighting unit (optional), and other accessories. The overall weight is 5.0 ± 0.2kg.
4. Parameters:
| Project | Technical parameters | |
| Ambient temperature | -20~45 ºC (working), -40~65 ºC (storage) | |
| Relative humidity | 10-80% RH (working), 5-90% RH (storage) | |
| Altitude | ≤ 3000m | |
| Tethering power module | Input voltage | 176-264Vac wide range input, single-phase 220Vac, frequency 45-65Hz |
| Output voltage | 300~420Vdc adjustable, factory default 400Vdc | |
| Output power | 800W (rated long-term output), 1000W (peak value ≥ 30s) | |
| Storage cable length | Standard storage cable 33m, supporting maximum storage cable ≥ 55m | |
| Interface | Input socket with switch, cable output locking aviation plug | |
| Button | High voltage button, take-up button, alarm indicator light | |
| Protection level | IPx4 | |
| Size | D265 *W150*H175 ± 0.5mm, excluding foot pads and handles | |
| Weight | 4.2 ± 0.1kg, including 33m tethered cable | |
| Tether cable | Material quality | Silver plated lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer |
| Carrying capacity | 1.5-2A | |
| DC resistance | 26 ± 0.2 Ω, 100m@20 ºC loop | |
| Tensile strength | ≥ 50kg, resistant to repeated retraction and release times ≥ 500 times | |
| Insulation strength | ≥ 3000Vdc, no breakdown for 1 minute | |
| Cable length | 33 ± 2m, supports customized line length | |
| External diameter | 2.2 ± 0.1mm | |
| Weight | 0.65 ± 0.05kg/100m | |
| Air module | Input voltage | 330-430Vdc wide range input |
| Output voltage | 17.2 ± 0.2Vdc, constant voltage output, supporting voltage customization | |
| Output power | 600W (rated long-term output), 800W (peak value ≥ 10s) | |
| Protection Function | Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection | |
| Isolation voltage | 3000V (Vin Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | |
| Installation method | Tool free snap on installation | |
| Heat dissipation method | Passive heat dissipation, natural air cooling of heat dissipation teeth | |
| Interface | Input locking aviation plug, output XT30 | |
| Protection level | IP54 | |
| Size | 115*59*35 ± 0.5mm, without mounting bracket | |
| Weight | 300 ± 10g, without external connectors | |
1. Unless otherwise specified, the above data are all tested at Ta=25 ºC, humidity<75%, nominal input, and rated load.
2. Due to space limitations, there is incomplete data in the table. If necessary, please contact our sales personnel to obtain it.
