Audited Supplier
WR-W1
SGS
Biodiesel Oil, Turbine Oil, Lubricant Oil, Transformer Oil, Engine Oil
380V/Customized
200 L/min
Waste Engine Oil
Diesel and Base Oil
Light Yellow
85%-92%
WR
Loose Packing
as capacity
Henan China
8419409090
Product Description
shangqiu wanrong Environmental Protection Technology Co., Ltd, is occupied in Petroleum refining, Pro-Environment, Chemical Technical Application, Technical Research and Development of the Project. Project design Equipment manufacturing and sales. The company has deep cooperation with Sinopec Shanghai Research Institute, and Nanjing Chemical Research Institute. Technology has always had a leading advantage in the industry. The company latest research and development of oil-gas phase directed catalytic cracking of waste engine oil regeneration technology, completed from the design, research and development volume output qualified diesel products.
Tire oil-gas phase catalytic separation of gasoline and diesel products all meet the national requirements of oil products. New
type Thin film + fractional distillation refining and regenerating base oil technology of Carclazyte, New type Thin film +
fractional distillation + NMP refining and regenerating base oil technology, the products has reached the international API
standards.
The company is committed to Technology First, Quality First principle. Process calculation, equipment calculation and simulation test are carried out for each set of the technology and equipment. The design software used included: Aspen,Pro2,HTRI, HExtran, SW-6, CAD, Plant 3D.
Product distribution:
12% Overview of residue decracking products:
3.product feature
Diesel:(Different regional raw materials, the results will be different)
Gas phase pyrolysis distillation data:
Tire oil-gas phase catalytic separation of gasoline and diesel products all meet the national requirements of oil products. New
type Thin film + fractional distillation refining and regenerating base oil technology of Carclazyte, New type Thin film +
fractional distillation + NMP refining and regenerating base oil technology, the products has reached the international API
standards.
The company is committed to Technology First, Quality First principle. Process calculation, equipment calculation and simulation test are carried out for each set of the technology and equipment. The design software used included: Aspen,Pro2,HTRI, HExtran, SW-6, CAD, Plant 3D.
Product distribution:
| Serial | Item | Oil yield | Usage |
| 1 | Diesel | 85% | * gas station blending * diesel car are used |
| 2 | Residual oil | 12% | * cracking materials * water-proof material |
| 3 | Non-condensable oil | 3% | * It can be used as fuel by gas spray gun. * Excess waste gas can be stored through a storage system. |
12% Overview of residue decracking products:
| Item | Yield |
| Cracking oil materials | 75% |
| Residual | 20% |
| Non-condensable gas | 5% |
3.product feature
Diesel:(Different regional raw materials, the results will be different)
| Item | Unit | Data |
| Density(20ºC) | Kg/m3 | 830.6 |
| Flash point | ºC | 55-60 |
| Acid value | mgKOH/ml | 0.07 |
| Viscosity mm2/s | mm2/s | 4.6 |
| Cetane number | >55 | |
| Moisture | no | |
| Mechanical impurities | no | |
| sulphur(mass fraction) | mg/mg | 0.03% |
Gas phase pyrolysis distillation data:
| Distillate mass/% | Detection of distillation temperature of gas phase cracking oil /ºC |
| Initial boiling point | 84 |
| 5 | 156 |
| 10 | 170 |
| 50 | 289 |
| 90 | 326 |
| 95 | 335 |
| Dry point of distillation | 342 |
