Audited Supplier
NJP-2500
1 Year
150000PCS/Hour
000, 00, 0, 1, 2, 3, 4, 5
with Automatic Vacuum Powder Feeder
with Automatic Empty Capsule Lifter
Preparation Machinery
Capsule
High Precision
CE, GMP, ISO
Computerized
Customized
New
by Email or Online Service
380V/3 or 220V/3
DEVELOP-MC
Veneer Case
CE
Shanghai
8422309090
Product Description
NJP-2500 Automatic Capsule Filling Machine & Capsule Filler & Pharmaceutical Machinery
Descriptions:
This capsule filling machine has been own developed through absorbing advantages from the same products, enjoy some features such like small machine outline, large producing capacity, accurate filling volume, good suitable to medicine and hollow capsule, running stably high automatization. Can automatically finish feeding, removing useless capsules, clipping and capsule finishing, cleaning mould at same time, its performance and features also including all contents of type 1200A/C/E, it's very suitable for hard capsule filling machine meet GMP&CE standard.
Technical Parameters:
Configuration list
Descriptions:
This capsule filling machine has been own developed through absorbing advantages from the same products, enjoy some features such like small machine outline, large producing capacity, accurate filling volume, good suitable to medicine and hollow capsule, running stably high automatization. Can automatically finish feeding, removing useless capsules, clipping and capsule finishing, cleaning mould at same time, its performance and features also including all contents of type 1200A/C/E, it's very suitable for hard capsule filling machine meet GMP&CE standard.
Technical Parameters:
| Machine model | NJP-2500 |
| Max capacity | 150000 capsules/hour |
| Suit for capsule size | 00#-5#and safety capsuleA-E# |
| No. of mould bores | 18 |
| Working station | 10 |
| Machine dimensions | 1150*1050*1970mm |
| Net weight | 1300Kg |
| Power | 380/220V 50/60Hz, 3phase 6.74kw (3.74+3kw of dust collector) |
| Capsule finish rate | ≥99.5% |
| Noise | <75dB |
| Powder Filling precision | Over 300mg, ≤±3%(mesh 40-80) |
| Compressed air | 0.06m3/min 0.3Mpa |
| Water requirement | Applied for Water cycle vacuum pump tank |
| Water inlet diameter | 20mm |
| Water outlet diameter | 27mm |
| Vacuum degree | 0.02Mpa-0.06Mpa |
| Working environment | 21ºC±3ºC |
| Working height of work shop | Manual lift≥2.6m,vacuum lifter≥2.8m |
| Relative humidity | 40~55% |
| Air discharge capacity of vacuum pump | 300m3/h |
| Special function | Pellet feeder. Medicine powder collector, the powder can be recycled back to hopper without sterilization |
| Control system | Frequency speed adjustable, PLC touch screen control |
Configuration list
| Description | Specification/Model NO | Brand | Qty | Remark |
| Indexing box | SDX, TAIWAN | Each 1 unit | ||
| Main machine motor | R37DT90L4 | SEW, Germany | 1unit | |
| Vacuum pump | SZ-0.8 | Shanghai china | 1unit | |
| Cleaner | 2.2KW | zhejiang china | 1 unit | |
| Man-machine interface | TK6070Hi | Vinview , Taiwan | 1unit | |
| Transducer | VFD022B43B | Delta, Taiwan | 1 unit | |
| PLC | DVP14E | Delta, Taiwan | 1unit | |
| light axis | DKNΦ20-50 | Japan | 1set | |
| Linear bearing | SDE50Y | Japan | 4pcs | |
| Linear bearing | SDE20Y | Japan | 20pcs | |
| Linear bearing | SDE12Y | Japan | 26pcs | |
| Roll-pin bearing | IKDCF18 | Japan | 2pcs | |
| Roll-pin bearing | IKDCF12 | Japan | 5pcs | |
| Roll-pin bearing | IKDCF6 | Japan | 10pcs | |
| Hot relay | 3UA50 | Siemens, German | 3pcs | |
| AC Contactor | 3TB43 | Siemens, German | 1 pcs | |
| AC contactor | 3TB41 | Siemens, German | 3 pcs | |
| Circuit breaker | 5SJ63-3P-32A | Siemens, German | 1 pcs | |
| Circuit breaker | 5SJ61-1P-10A | Siemens, German | 1 pcs | |
| Sensor | LJC30A-H-Z/AB2 | Shanghai, China | 1 pcs |
