Audited Supplier
According to Customers' Drawings
Rework If The Problem Is Due to Our Responsibility
Rework If The Problem Is Due to Our Responsibility
New
RoHS, ISO9001
GB
Customized
Alloy
Optic Device
Multi-Option
Available
Available
Carton
According to the drawings of customers
Hubei, China
8401200000
Product Description
Description of This Part
Material
6061-T6
Workpiece
This workpiece is the case of the optical lens, which needs to be equipped with optical components in the middle, with high precision requirements.
Machining Characteristics
1.Lathe rough turning, and stock is left out.
2.Aging treatment to fully remove the cutting stress in the workpiece.
3.Lathe finish machining, with dimensions machined to the requirements, cylindricity of installation positions of internal optical components is within 0.007mm, and concentricity within 0.01mm.
4. Finish milling of inside and outside the workpiece is done by 4+1 axis machining center, and the position accuracy and perpendicularity shall be within 0.02mm.
Surface Treatment
Black anodizing, meeting the requirements of environmental protection
Inspection
The places where accuracy is required meet the requirements of drawing, and the flatness and perpendicularity are within 0.02mm, and cylindricity 0.007mm , and concentricity 0.01mm. It is tested with CMM, and reports of finished products from CMM are generated.
General Information of Our Products and Services
1. Scope of Typical Parts
Parts of automation equipment, lasers, optical fiber electronics, optical lens, infrared thermal imaging devices, automobile and so on.
2. Scope of Workpiece Materials
Metal materials: stainless steel, aluminum, aluminum alloy, magnesium alloy, brass, mild steel, Cr12, SKD11 and so on.
Non-metal materials: POM, ABS, acrylic, nylon, PC, PMMA, Bakelite, PEEK, Teflon and so on.
3. Machining Methods
Milling, turning, medium-speed wire cutting, slow-speed wire cutting, grinding, turning and milling forming)
4. Tolerance Ranges
Metal Machining: 0.01mm, depending on the product.
Non-metal Machining: 0.02mm, depending on the product.
5. Surface Roughness Range
Ra < 0.8, depending on the product and material.
6. Workpiece Size Range
10-500mm
7. Surface Treatment Options
Aluminum alloy: black oxidation, natural color oxidation, color oxidation, hard oxidation, micro arc oxidation, conductive oxidation.
Stainless steel: passivation, black zinc plating, blackening, PVD.
Steel: blackening, bluing, chromium plating, nickel plating, black zinc plating, color zinc plating, white zinc plating, paint copper: gold plating, silver plating, blackening, passivation, etc.
8. Lead Time for Samples
It takes about 15 days for production, depending on the product.
9. Lead Time for Formal Orders
It's determined according to order quantity and other requirements.
10. MOQ
5 pieces.
11. Payment Terms
Normally, T/T 30% is to be prepaid and balance paid before shipment for the first order, or decided by negotiation.
12. Transportation
0.1-150 KG: DHL air freight is prioritized.
Over 150 KG: Air or ocean freight with customs declaration.
13. Packaging
Foam sealing, independent carton, self-sealing bag, oil paper, vacuum packaging, etc.
14. Options of Transportation Companies
Air Freight: Fedex, DHL, UPS, TGL, etc .or according to customer's requirement.
Ocean Freight: DIMERCO, Agility, or according to customer's requirement.
15. Port of Delivery
Shanghai, or according to customer's requirement.
