Audited Supplier
PA-12
24 Hours
One Year
Injection Blow Molding
Horizontal
Thermoplastic
Plunger Type
Mechanical
Automatic
Computerized
ISO9001:2008
Carton Box
4*2.5
China
84018407
Product Description
Wear- Resist Temperature- Resistant PA12 Nylon TUbe for Liquid Delivery
PA12 Nylon Tube
Feature:
1. The tube body is smooth, the fluid resistance is small, self-lubricating, and does not contain platicizers.
2. It has stable chemical properties and is resistant to water, oil and gas (it doesn't not contain strng acid and alkali)
3.Long service life, stable quality, low price , substitute for copper and aluminum tubes.
Precautions
Do not let the tube body rub against other monomers, pull too much, twist and bend, otherwise the tube body will be damaged and deformed, which will affect the working performance.
When the temperature in the environment or fluid work is higher than 70 degree, please use it with caution, the higherthe temperature, athe lower the performance of the tubem such as reducing the burst pressure.
Technical Parameter
O.D : 4 mm
I.D: 2.5 mm
Burst pressure: 6.0 Mpa (normal temperature)
Min bend radius: 20mm
W.T:7.0g/m
Allowed tolerance OD:-0.1 /ID:+0.1mm
Packing length: 100 meters/ roll
Lube line Nylon Pipe
Operating temperature: -30 degree to 120 degree
Application: Widely used for mechanical lubrication, plastic injection molding machines,as well as visible liquid delivery
PA12 Nylon Tube
Feature:
1. The tube body is smooth, the fluid resistance is small, self-lubricating, and does not contain platicizers.
2. It has stable chemical properties and is resistant to water, oil and gas (it doesn't not contain strng acid and alkali)
3.Long service life, stable quality, low price , substitute for copper and aluminum tubes.
Precautions
Do not let the tube body rub against other monomers, pull too much, twist and bend, otherwise the tube body will be damaged and deformed, which will affect the working performance.
When the temperature in the environment or fluid work is higher than 70 degree, please use it with caution, the higherthe temperature, athe lower the performance of the tubem such as reducing the burst pressure.
Technical Parameter
O.D : 4 mm
I.D: 2.5 mm
Burst pressure: 6.0 Mpa (normal temperature)
Min bend radius: 20mm
W.T:7.0g/m
Allowed tolerance OD:-0.1 /ID:+0.1mm
Packing length: 100 meters/ roll
Lube line Nylon Pipe
Operating temperature: -30 degree to 120 degree
Application: Widely used for mechanical lubrication, plastic injection molding machines,as well as visible liquid delivery
