Audited Supplier
OD250*ID70*T3.5MM
ISO9001:2008
Milling Machine
Non-Standard
Uncoated
Cemented Carbide
ISO9001:2008, ISO9001:2008
Milling Machine, Milling Machine
Non-Standard
Uncoated
Cemented Carbide
Medium Carbon
100mm
15mm
5
Disc Cutter
250mm
70mm
3.5mm
Yg8
Medium Grain Size
14.8g/cm3
89.5hra
2800MPa
8%
92%
ZZUP
25kg. Carton
OD250*ID70*T3.5MM
Zhuzhou, Hunan, China
820900100
Product Description
Od250*ID70*T3.5mm Gti10 NK200250 Tungsten Carbide Lead Wire Cutter
tungsten carbide circular cutter,cemented carbide disc cutter,tungsten carbide cutter with teeth,hard alloy circular cutter,tungsten alloy disc cutter
suply all kinds of grades,according customer's request in size,manufacture high quality and compititive tungsten carbide circular cutter,cemented carbide disc cutter,hard alloy circular cutter,tungsten alloy disc cutter.
1. promise the 100% virgin material .
2. Sintere by vacuum sintering furnace and HIP machine with excellent specifications without any sand hole.
3. suply blank or polished sharpen blade carbide circular cutter
4. more than 150 sets moulds for different sizes.
5. Grades: YG6,YG6X,YG8,YG10X.YS2T etc for choosing.
6. we can product the goods according your drawing and sizes.
tungsten carbide circular cutter,cemented carbide disc cutter,tungsten carbide cutter with teeth,hard alloy circular cutter,tungsten alloy disc cutter
suply all kinds of grades,according customer's request in size,manufacture high quality and compititive tungsten carbide circular cutter,cemented carbide disc cutter,hard alloy circular cutter,tungsten alloy disc cutter.
1. promise the 100% virgin material .
2. Sintere by vacuum sintering furnace and HIP machine with excellent specifications without any sand hole.
3. suply blank or polished sharpen blade carbide circular cutter
4. more than 150 sets moulds for different sizes.
5. Grades: YG6,YG6X,YG8,YG10X.YS2T etc for choosing.
6. we can product the goods according your drawing and sizes.
| Grade | Density g/cm3 | T.R.S Mpa | Hardness HRA | Performance & application recommended | ISO code |
| YG6X | 14.9 | 1850 | 92 | Fine grain alloy, good wear resistance. Semifinishing of chilled cast iron, non-ferrors metals alloys, semi-finishing and finishing of hardened steel, alloy steel. | K10 |
| YG6 | 14.9 | 2450 | 90.5 | High wear resistance, bending strength, suitable for electronic industry with the disc cutting knife. | K10 |
| YG8 | 14.8 | 2450 | 90.5 | High strength ,impact and shock resistance higher than YG6X,,but wear resistance and cutting speed comparatively lower.Roughing of cast irons,non-ferrors metals and their alloys as well as non metallic materials at low cutting speed | K20 |
| YG10X | 14.7 | 2320 | 89.5 | High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. Roughing of cast irons, non-ferrors metals and their alloys as well as | K40 |
| YS2T | 14.5 | 2200 | 91 | Fine grain alloy, good wear resistance. Used for processing hard wood,veneer board,PCB,PVC and metals. | M10 |
Sizes choosing:
| TYPE | OD(mm) | ID (mm) | S (mm) | TYPE | OD(mm) | ID (mm) | S (mm) | |
| Φ12×Φ6×S | 12 | 6 | 0.6-4.5 | Φ60×Φ19×S | 60 | 19 | 0.8-7.0 | |
| Φ13×Φ6×S | 13 | 6 | 0.6-4.5 | Φ63×Φ17×S | 63 | 17 | 0.8-7.0 | |
| Φ16×Φ6×S | 16 | 6 | 0.6-4.5 | Φ70×Φ22×S | 70 | 22 | 0.8-7.0 | |
| Φ22×Φ10×S | 22 | 10 | 0.6-4.5 | Φ75×Φ22×S | 75 | 22 | 0.8-7.0 | |
| Φ25×Φ12×S | 25 | 12 | 0.6-5.5 | Φ80×Φ22×S | 80 | 22 | 0.8-7.0 | |
| Φ32×Φ10×S | 32 | 10 | 0.8-5.5 | Φ83×Φ21×S | 83 | 21 | 0.8-7.0 | |
| Φ40×Φ10×S | 40 | 10 | 0.8-6.0 | Φ86.5×Φ21.5×S | 86.5 | 21.5 | 1.0-7.0 | |
| Φ45×Φ13×S | 45 | 13 | 0.8-6.0 | Φ90×Φ22×S | 90 | 22 | 1.0-7.0 | |
| Φ53×Φ13×S | 53 | 13 | 0.8-6.0 | Φ100×Φ22×S | 100 | 22 | 1.0-7.0 | |
| Φ52×Φ24.5×S | 52 | 24.5 | 0.8-6.0 | Φ125×Φ22×S | 125 | 22 | 1.0-7.0 | |
| Φ53×Φ24.5×S | 53 | 24.5 | 0.8-6.0 | Φ200×Φ70×S | 200 | 70 | 3.0-4.5 | |
| Φ55×Φ16×S | 55 | 16 | 0.8-6.0 | Φ250×Φ70×S | 250 | 70 | 3.0-4.5 | |
| Φ58×Φ22×S | 58 | 22 | 0.8-6.0 |
Packing details
Contact details
