Audited Supplier
Oil Proofing Agent
68937-55-3
CCIC, REACH
Yes
Yellow
Liquid
Oil Proofing Agent
Paper Processing Chemicals
Paper Chemicals, Paper Making Chemical
Chemical Auxiliary Agent
20%
500 Max
Non-Inoic
6-9
12 Months
jiulong
25kgs/Drum, 200kg/Drum, 1000kgs/IBC Drum
20%
China
38099200
Product Description
| OIL PROOFING AGENT JL106 | ||
| Description | JL106 is a high performance, water-based cationic fluorochemical agent specifically designed to impart oil and grease resistance to pulp molding products, paper and paperboard without changing the feel or appearance. This product is based on short-chain molecules that cannot break down to PFOA in the environment. JL106 can be applied internally in the wet end or on the surface of paper or board. | |
| Benefits | JL106 imparts excellent water and oil repellency to pulp molding products, paper and paperboard. It prevents penetration in products such astakeout trays, picnic plates, soup bowls and specialty molded applications. Products manufactured with JL106 are readily recyclable. JL106 has low foaming nature. In some applications JL106 will provide sufficient water repellency without any additional sizing agent. | |
| Typical Properties | Appearance pH Solids(%) Ionic nature Density (@20oC) | amber or light yellow aqueous liquid 4 - 6 20±1 cationic 1.05-1.1 |
| Product Application | JL106 is intended for wet-end applications with existing thermoforming equipment or surface treatment for providing oil, grease and water repellencyto a wide variety of applications. For molded pulp, the recommended dosage is 0.8-1.2%.For the surface treatment application, the recommended dosage is 5-20kg/ton paper. JL106 is cationic product, which have good compatibility with other cationic or non-ionic chemicals. Anyway, it is recommended to check its compatibility with the system prior to use. The product can be diluted to any concentration with soft or deionized water. The dilution step should be carried out with good agitation in order to assure proper dispersion. JL106 can be applied in conjunction with sizing agent to produce pulp molding products or paper products. Where additional water repellency is required, JL106 can be applied with hydrocarbon-type water repellents If the system contains a large number of bubbles or dissolved gases, we recommend to add suitable defoaming agent since air bubbles and dissolved gases can affect the performance of JL106. Lab test is strongly recommended to carry out to determine the best formula and the optimum dosage before the formal using. | |
| Regulation | INTERTEK ---USA FDA 21 CFR 176.170 ---CHINA GB9685-2016 ---EU RoHS Directive 2011/65/EU Appendix II Amendment Directive (EU) 2015/863 Toxicological Evaluation ---Acute oral toxicity test in rat |
| Package & Storage | 200KG plastic drums /1000KG IBC Store at temperatures between 0°C and 40°C.Keep tightly closed in a dry, cool and well-ventilated place. The shelf life is 12 months. |
| Healthy and Safety | Before using this product, please read the Material Safety Data Sheet and follow all applicable directions. |
