Online Technical Support Zulin Steel Prop Column Formwork

 Timber Beam Wall & Column Formwork

Timber Beam Wall Formwork

Timber beam wall  formwork is used for the concrete pouring of wall. The application of large areas' formwork has greatly increased the construction efficiency and reduced the cost. The system is convenient for construction and it is easy to control the quality.

The system has two parts, formwork and pull-push props. The formwork is made of plywood, timber beam and steel waling. Pull-push props can be designed according to the project or simply select the standard props. Tie-yoke and tie-rod are used to reinforce the corner.

Timber Beam Column Formwork

Timber Beam Column Formwork is used for the concrete pouring of square or rectangle column. The system has the same structure and similar connection type with wall formwork.

Adjustable column formwork
The adjustment of adjustable column formwork is realized by changing the steel waling relative position
1. Standard specifications
The steel waling of standard adjustable column formwork has three specifications. This can satisfy the need of concreting of column with side length from 200mm to 1200mm.

When the steel waling are 1500 & 1200mm long, we can adjust the section dimension from 800x800mm to 400x400mm or any size column with side length from 400mm to 800mm, square or rectangle.
Completed Projects                                                                                                                                                                                                         

Business Process