HRS-26A
Optic Fiber Transmission Equipment
CE
New
Satellite TV & Analog TV Pin Optical Receiver
Satellite TV& Analog TV
1260~1620nm; 1540~1563nm
47~862MHz; 950~2600MHz
>50db; > 51db
<-65db;< -63db
<-63db; <-53db
RS232
3rd Part Certification
AITC
CE
China
8517622990
Product Description
HRS-26A
45~860MHz & 950~2600MHz
Optical Analog Satellite Receiver
Product Description
HRS-26A-108-00: Adopting 1U 19" standard casing, the working parameters of the unit is controlled by micro-processor. LCD on the front panel can display the working status and failure and diagnosis. Standard RS232 communication interface, SNMP function. Suitable for project application.
HRS-26A-308-00: Wall-mounted, Aluminum dia-casting, easy to connect with multi-switch to STB.
HRS-26A-308-WD: Wall-mounted, Suitable for FTTX PON. Build-in WD1543, un-seamed connection with ONU in EPON, GPON system.
Product features
1.High linearity, suitable for Analog CATV & SAT-IF application.
2.Wide band: 45~862MHz & 950~2600MHz.
3.It can receive analogue CATV and SAT-IF signal over single fiber.
4.It can be compatible with any FTTX PON.
5.Excellent P/P ratio

Technical Index
45~860MHz & 950~2600MHz
Optical Analog Satellite Receiver
Product Description
HRS-26A-108-00: Adopting 1U 19" standard casing, the working parameters of the unit is controlled by micro-processor. LCD on the front panel can display the working status and failure and diagnosis. Standard RS232 communication interface, SNMP function. Suitable for project application.
HRS-26A-308-00: Wall-mounted, Aluminum dia-casting, easy to connect with multi-switch to STB.
HRS-26A-308-WD: Wall-mounted, Suitable for FTTX PON. Build-in WD1543, un-seamed connection with ONU in EPON, GPON system.
Product features
1.High linearity, suitable for Analog CATV & SAT-IF application.
2.Wide band: 45~862MHz & 950~2600MHz.
3.It can receive analogue CATV and SAT-IF signal over single fiber.
4.It can be compatible with any FTTX PON.
5.Excellent P/P ratio

Technical Index
| Performance | Index | Supplement | ||||||
| Min. | Typ. | Max. | ||||||
| Optical feature | Operating wavelength | (nm) | 1260 | 1620 | HRS-26A-× × × -00 | |||
| 1540 | 1563 | HRS-26A-× × × -WD | ||||||
| Pass wavelength | (nm) | 1310/1490 | HRS-26A-× × × -WD | |||||
| Responsibility | R13 | (A/W) | 0.9 | 1310nm | ||||
| R15 | 0.95 | 1550nm | ||||||
| Receiving optical power | Typical | (dBm) | -8 | +2 | ||||
| Sensitivity | -13 | Pr | ||||||
| Overload | +5 | Po | ||||||
| Return loss | (dB) | 50 | ||||||
| Optical connector | SC/APC | Option LC/APC | ||||||
| RF feature | Operating bandwidth | (MHz) | 45 | 862 | ||||
| Output level | (dBmV) | 10 | 30 | |||||
| Flatness | (dB) | -0.75 | +0.75 | |||||
| Return loss | (dB) | 16 | 47~862MHz | |||||
| Input impedance | (Ω ) | 75 | 47~750MHz | |||||
| RF connector | F-female | |||||||
| Channel loading | PAL-D/60CH | |||||||
| CNR | 1310nm | (dB) | 51 | |||||
| 1550nm | 50 | |||||||
| CTB | 1310nm | (dB) | -65 | |||||
| 1550nm | -63 | |||||||
| CSO | 1310nm | (dB) | -63 | |||||
| 1550nm | -53 | |||||||
| IF feature | Operating bandwidth | (MHz) | 950 | 2200 | 2600 | |||
| Output level | (dBmV) | -40 | +24 | |||||
| Flatness | (dB) | -0.5 | +0.5 | 40MHz | ||||
| -1.5 | +1.5 | 950~2200MHz | ||||||
| Return loss | (dB) | 12 | ||||||
| Input impedance | (Ω ) | 75 | Option 50Ω | |||||
| IF connector | F-female | |||||||
| IM3 | (dB) | -65 | ||||||
| HUM | (dB) | -60 | ||||||
| General feature | SNMP network management interface | RJ45 | ||||||
| Communication interface | RS232 | |||||||
| Power supply | AC | (V) | 90 | 220 | 265 | |||
| DC | -30 | -48 | -72 | |||||
| Power consume | (W) | 10 | Single PS | |||||
| Operating temp. | (C) | -5 | +65 | |||||
| Storage temp. | (C) | -40 | +85 | |||||
| Operating relative humidity | 5 | 95 | ||||||
| Size | (" ) | 19× 14.5× 1.75 | HRS-26A-108 | |||||
| (mm) | 117× 72× 29 | HRS-26A-308 | ||||||



Audited Supplier










