Audited Supplier
Automotive crystal plating solution IOTA 9970
The main body of the product is special polysiloxane, which is different from the popular coating products with siloxane as the main component in the market. Iota9970 products form a silica film after crystallization, with high hardness, good transparency, oxidation resistance, anti UV, high adhesion, good water repellency, and brightening effect on car paint (black car is especially excellent)!
Solid content | 40% | Solvent | mineral oil |
Hardness(Chinese pencil) | 5H | Transparency(visible light) | >90% |
Adhesion (grid method) | 0 | Water contact angle | 110° |
The IOTA 9970 product forms a silicon dioxide film after crystallization. The main body of the product is a special polysiloxane, which is different from the popular silicone-based coating products on the market. It has high hardness, good transparency, oxidation resistance, anti-ultraviolet, high adhesion, good water transfer, and has a brightening effect on car paint (especially for black cars). The product has excellent durability.
1. New cars do not need to be polished. If there are scratches, please polish them first.
2. The vehicle is degreased and cleaned to ensure the dry surface of the body.
3. Take the crystal plating solution and pour it on the eyeglass cloth or professional sponge, and start to wipe on the surface of the car. It is suggested to use a cross wipe, that is, a horizontal wipe, a vertical wipe.
4. After finishing the wiping, use dry towel to start from the initial position of the wiping for leveling. In order to facilitate the construction, partial construction is recommended. If first do the front car cover, wipe the crystal solution after 1 minute with a dry towel, followed by the door, roof, tail construction.
5. After observing the flatness of car paint coating surface, the car shall be placed in a clean place for 2 hours and the construction shall be completed.
1. Choose dry weather as far as possible.
2. After the construction of the vehicle, if the water is tested, please wipe the residual water beads after the test.
3. Wash the car after 24 hours a day.
4. It's better not to see water within 24 hours after construction. If it rains, try not to go out. If it is necessary, clean the surface water after go out.
5. This product has a certain chemical smell. Please do not directly face the bottle mouth and wear disposable gloves during construction.
Iota Silicone Oil (Anhui) Co., Ltd was established in 2010, located in Bengbu, Anhui Province, which is the manufacturing operation of Iota Corporation Limited in China. As a member of Iota Corporation Our company covers an area of 30,000 square meters and a construction area of 24,000 square meters.
Iota Silicone Oil maintains close long-term cooperative relationship with many universities and research institutes in Nanjing and implements a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment. Technical support and scientific management of the powerful can provide all kinds of high quality organic silicon materials for our customers.
Our main products: Phenyl silicone, diffusion pump oil, Methyl silicone oil, Amino silicone oil, Hydroxy silicone oil, Vinyl silicone oil, Organic polysilazane, Inorganic polysilazane, Foam silicone rubber, Hexamethyldisilazane. Iota enjoy high reputation in our market for Phenyl silicone, Polysilazane resin, Foam Silicone and Hexamethyldisilazane.
Our products are mainly exported to Southeast Asia, South America, Europe, America, the Middle East and Medium-High level China market.
Thanks for your interest in Iota Silicone Oil, We look forward to doing business with you!
