Audited Supplier
Oteco Demco Fmc Spm Type 72 Replacement Mud Gate Valve 2" 3 1/16" V324 V336 V350 Spec 6AOteco Memco FMC SPM Type 72 Replacement Mud Gate Valve 2" 3" V324 V336 V350 Spec 6A
API standard spec 6A Gate valve
Oteco Demco Fmc Spm Type 72 Replacement Mud Gate Valve 2" 3 1/16" V324 V336 V350 Spec 6A
Oteco Demco FMC SPM Type 72 Replacement Mud Gate Valve 2" 3" V324 V336 V350 Spec 6A
Resilient-seated gate valves according to European standard EN 1171 with straight, smooth and non-constricted passage. Internally enamel, externally EKB. For water, air and non-aggressive gases
Oteco Demco FMC SPM Type 72 Replacement Mud Gate Valve 2" 3" V324 V336 V350 Spec 6A
Specification Details
Design Std:EN 1171
Size:DN40--DN1000
Pressure Rating: PN16,PN10
Seat: NBR,EPDM, VITON,PTFE,NEOPRENE
Face to Face: EN 558 Series 14(DIN 3202 F4)
Pressure Testing:DIN EN593/DIN EN12266-1
Body/Bonnet: Ductile iron EN-GJS-500-7/EN 1563
Flange Ends: DIN EN1092-2/Type B
Working temperature:-10 to +120ºC
Oteco Demco FMC SPM Type 72 Replacement Mud Gate Valve 2" 3" V324 V336 V350 Spec 6A
Oteco Demco FMC SPM Type 72 Replacement Mud Gate Valve 2" 3" V324 V336 V350 Spec 6A
Mud Gate Valve is equivalent to OTECO model 72 series, easy operation, tight shut offs, long service life before overhaul. This assures simple, fast, low cost renewal in the field.
Specifications:
- Size: 2", 3", 4", 4" x 5"
- Working Pressure: 2000psi, 3000psi, 5000psi
- Working Temperature: -46°C ~ +240°C
- Connections: LP Threaded, Butt-weld, Flanged, Union Available
- Working Medium: Sour Gas, Water Flood
- Valve body protected by oil and abrasion resistant long life rubber seals
- Full rising, one piece forged gate & stem, shows at a glance if valve is open, partly open or closed.
Application:
Mud pump line, standpipe manifolds, oil and gas pipelines, abrasive drilling mud system, corrosive water flood lines, cementing services, wellheads, and well treating chemicals
Standard Assembly:
Weld end-2" M11200-101, M11200-102, M11200-111, M11200-112.
Weld end-3" M11300-101, M11300-102, M11300-111, M11300-112.
Weld end-4" M11400-101, M11400-102, M11400-111, M11400-112.
Screwed end- 2" M122000-201, M122000-202, M122000-211, M122000-212.
Screwed end- 3" M123000-201, M123000-202, M123000-211, M123000-212.
Screwed end- 4" M124000-201, M124000-202, M124000-211, M124000-212.
Flange end-2" M132000-301, M132000-302, M132000-311, M132000-312.
Flange end-3" M133000-301, M133000-302, M133000-311, M133000-312.
Flange end-4" M134000-301, M134000-302, M134000-311, M134000-312.
2" 2000PSI V-224 V-224-F
2" 3000PSI V-236 V-236-F
2" 5000PSI V-250 V-250-F
3" 2000PSI V-324 V-324-F
3" 3000PSI V-336 V-336-F
3" 5000PSI V-350 V-350-F
4" 2000PSI V-424 V-424-F
4" 3000PSI V-436 V-436-F
4" 5000PSI V-450 V-450-F
| NO | DESCRIPTION | MATERIAL | 2000/3000/5000 WP | ||
| 2" | 3" | 4" | |||
| 1 | HANDWHEEL | / | M120132 | M120142 | M120143 |
| 2 | STEM NUT | / | M120232 | M120242 | M120243 |
| 3 | GATE | 4130 Nickel Plated 316SS | M120323 | M120333 | M120343 |
| 4 | SPLIT BONNET ASSEMBLY | Incl. item5, 6 &17 | M120432 | M120442 | M120443 |
| 5 | BONNET BOLT | 2 req'd | M120532 | M120542 | M120543 |
| 6 | BONNET NUT | 2 req'd | M120623 | M120623 | M120643 |
| 7 | STEM PACKING | BUNA-N VITON | M120732-1 M120732-2 | M120742-1 M120742-2 | M120743-1 M120743-2 |
| 8 | STEM PACKING RING | 1020 Cadmium Plated 316SS | M120832 | M120842 | M120843 |
| 9 | VALVE BODY | Standard/Sour Gas | M120925 | M120935 | M120945 |
| 10 | GATE PACKING | BUNA-N VITON | M121023-1 M121023-2 | M121033-1 M121033-2 | M121043-1 M121043-2 |
| 11 | WEAR PLATE | 1026 Carburized/316SS | M121123 | M121133 | M121143 |
| 12 | O RING | BUNA-N VITON | M121223-1 M121223-2 | M121233-1 M121233-2 | M121243-1 M121243-2 |
13 | BODY SUB | WELD SCH.XXH WELD SCH.160 SCREW LP SCREW NUE FLANGED RAISED FACE FLANGED RTJ | M121323-10 M121323-11 M121323-20 M121323-21 M121323-30 M121323-31 | M121333-10 M121333-11 M121333-20 M121333-21 M121333-30 M121333-31 | M121343-10 M121343-11 M121343-20 M121343-21 M121343-30 M121343-31 |
| 14 | BODY CAP | Standard/Sour Gas | M121425 | M121435 | M121445 |
| 15 | BODY STUD | 4 req'd | M121525 | M121535 | M121545 |
| 16 | BODY STUD NUT | 4 req'd | M121625 | M121635 | M121645 |
| 17 | GREASE FITTING | Steel, 1/8"PTF | - | - | - |
| 18 | GREASE FITTING | Steel, 1/8"PTF | - | - | - |
Major repair kits includes Gate Packing, Wear Plate, O-ring, Gate, Stem Packing Minor repair kits includes Gate Packing, Wear Plate, O-ring | |||||
SEACO Oilfield Equip,is manufacturer & stockist of equipments,services and solutions to the upstream to downstream in oil & gas industry.We are aimed at helping customers to obtain the maximum from their each well.Providing our customers superior quality at the best value for products and services in order to ensure our customers' continued satisfaction.
Our main range include but not limited below:
1).Rig packages: 250hp to 3000hp Land drilling rigs; Workover rigs(Fast-moving rigs are available).
2).Rig components: Crown block;Travelling block; Hook; Swivel; Rotary table; Drawwork; Driller's cabin; MCC/SCR house; MCC/VD house; Top drive ect...
3).Wellhead & Pressure control equipments: BOP; Chock & Kill manifold; Pressure hoses; BOP closing unit; Casing&Tubing head; X-Mas tree; Valves; Spools and flanges ect...
4).Solid control & Mud system equipments: Shale shaker; Desander; Desilter; Mud cleaner; Hopper; Centrifuge; Agitator; Mud tanks; Unions,ect...
5).Tubulars & Drilling strings: Drill pipe; HWDP; Drill collar; Kelly; Casing; Tubing; Pup joint; Sucker rod; Line pipes ect...
6).Tubular Running and handing tools: Elevator; Slip; Manual/Power tong; HPU; Bushing; Spinner; Bit breaker; Spider; Links; Stuibing guide; Thread protector ect...
7).Downhole/Fishing tools: Drilling & Fishing jar; Stabilizers; Hole opener; Overshot; Drilling bit ect...
8).Cement tools: Cement unit;Float collar; Float shoe;Liner hanger;Cement head ect...
9).Others: Air winch; Drilling line; Safety equipments; Mud pump spare parts; Rig parts; Fittings ect...
10). Commissioning and other services.
