Audited Supplier
Expertly compatible with a wide array of materials, including PET, BOPP, Kraft paper, Alu/PET foil, Copper mylar foil, Mica tape, non-woven fabric, water-blocking tape, insulating tape, and more.
Employing the center surface winding method, this machine provides stable and consistent winding tension, ensuring the film or tape surface remains unblemished and intact.
1. Constructed with a robust 35mm thickness steel plate for the machine's side wall and base, it guarantees stability with no vibrations even at high speeds.
2. Versatile with compatibility for both razor and circular blades, this slitter can adeptly handle a variety of flexible tape materials.
3. Unwinding tension is expertly managed in a tapering mode, with an optional automatic tension sensor control for enhanced precision.
4. Features automatic web aligning (EPC), with choices between an ultrasonic sensor and a photoelectric sensor for optimal performance.
5. Independently driven winding shafts allow the machine the flexibility to handle different coil diameters simultaneously on two separate shafts.
6. Equipped with 4 sets of liquid pneumatic cylinders, the winding shafts automatically ascend and descend with precision.
7. A sophisticated PLC controls the entire electrical system of the machine, ensuring streamlined operations.
8. The machine's operational status is conveniently displayed and monitored via an intuitive HMI touch screen interface.
| Master roll width | 500 - 1300mm |
| Master roll OD | 800mm Max. |
| Minimum slitting width | 5mm Min. |
| Maximum winding OD | 600mm (depending on the tape material and slitting width) |
| Speed | 300m/minute (depending on the tape material and slitting width) |
| Core ID | 50/75/150mm |
| Power source | 3 Phase 380V,50/60Hz |
| Air source | >5kg/cm2 |
1. Do you provide installation and commissioning service after delivery?
Yes, if in field installation and commissioning requested, we can send well trained staff to the buyers' place. The buyer should pay the round way tickets and accomodation costs.
2. How do you do aftersale service?
Firstly we need the users to report the detailed situation of the machine performance by video call or email. If only software / program problem, we can solve the issue by remote computer assistance. If any hardwares need to be replaced, we will send the replacement. Freight should be paid from the user side.
3. Do you accept customized order?
Yes, almost all these kinds of machines are made according to the buyer's request. Firstly we need to study customer's request details, and then make the offer accordingly.
4. How to select the EPC sensor options?
Normally non-transparent tape suits to using photoelectric sensor, transparent tape uses untrasonic sensor. Sure we can provide both. The cost is not much.
5. How to select tension control options?
For adhesive tapes, it's better to use tapering type tension control. Automatic tension sensor is good for unwinding smooth low tolerance tape materials.
6. Can we see some existing machines before confirm the order?
Yes, there are some customers quite near our place. Welcome to visit us to inspect the machines.
