Audited Supplier
BP-8170-D
Lifetime Maintenance
1 Year
1000mm
<900kg
Material Testing Machine
<1000KN
0.5
Electronic Load
Dynamic Load
Digital
Computer Control
500-1000Kg
AC380V
Under
BAOPIN
Plywood Wooden Case
960*600*1500(W*D*H)mm
China
8477800000
Product Description
PLC control system laboratory press
This laboratory press applies to the compression and molding of rubber, plastics, resins and other polymer materials. The laboratory press equipped with a programmable LCD, which can set pressure, temperature, time, exhausting frequency and the number of seconds with human-machine interface operating system.
Parameters:
Specification:
1.Controller: PLC programmable color touch screen has human-machine interface. All the operating parameter can be set and controlled at will. Mould pressuring process and vulcanization curve can be displayed dynamically.
2.Heating method: Electro-thermal tube
3.Cooling method: Tap water cooling
4.Working layer: Two layers. The upper die plate heating, the lower die plate cooling.
5.Oil pressure system: The closed-loop control system of proportion hydraulic flow valve with the functions of automatic compensation and time delay stopping of the fuel tank.
This laboratory press applies to the compression and molding of rubber, plastics, resins and other polymer materials. The laboratory press equipped with a programmable LCD, which can set pressure, temperature, time, exhausting frequency and the number of seconds with human-machine interface operating system.
Parameters:
| Capacity | 50/80/100/150T (optional) |
| Temperature range | Normal temperature ~ 300 ºC |
| Pressing plate size | 300 X 300/350 X 350/400 X 400/450 X 450/500 X 500/ 550 X 550 mm |
| Distance of pressing plate | 100 mm |
| Exhausting frequency | 0 ~ 10 times can be set |
| Oil pressure medium | Mobil 32# antifreeze hydraulic oil |
| Power supply | 3 ∮, five lines |
Specification:
1.Controller: PLC programmable color touch screen has human-machine interface. All the operating parameter can be set and controlled at will. Mould pressuring process and vulcanization curve can be displayed dynamically.
2.Heating method: Electro-thermal tube
3.Cooling method: Tap water cooling
4.Working layer: Two layers. The upper die plate heating, the lower die plate cooling.
5.Oil pressure system: The closed-loop control system of proportion hydraulic flow valve with the functions of automatic compensation and time delay stopping of the fuel tank.
