Audited Supplier
BP-8176-BT
Lifetime Maintenance
1 Year
Pipe,Sheet,Profile,Filament,Piston,etc.
PVC,PE, PP,ABS,WPC,Polystyrene,EPE,XPS,etc.
Extrusion
One Feed
Integral Type Extruder
Single-Screw
Full Intermeshing
Deep Screw
Exhaust
Automatic
Computerized
BAOPIN
Polywood Wooden Case
850*450*650(W*D*H)mm
China
8479899990
Product Description
PLC desktop single screw mini extruder
The single screw mini extruder is suitable for polymer processing molding, especially for a small amount of samples for scientific research and development, to simulate the plastic processing of various aspects of continuous and discontinuous process, especially suitable for the teaching and research and development.
The single screw mini extruder is equipped with PLC control system, can set and monitor all parameters. It is small and convenient, and is the best choice for laboratory test and small-scale production.
Parameters:
Specification:
1.Screw/barrel material: Made of 38CrMoAl chromium-molybdenum steel.
2.Heating zone: Four mica heaters are in the area of charging barrel, one heater is in the handpiece area. Each area has a copper cooling fan covered with security wind shield.
3.Cooling facility: Three groups of multi-wing fans to cool air quietly and strongly.
4.Driving system: Precision gear reduction motor and deceleration rotation distribution integration.
5.Electric control system: PLC programmable color touch screen, man-machine interface operation system.
The single screw mini extruder is suitable for polymer processing molding, especially for a small amount of samples for scientific research and development, to simulate the plastic processing of various aspects of continuous and discontinuous process, especially suitable for the teaching and research and development.
The single screw mini extruder is equipped with PLC control system, can set and monitor all parameters. It is small and convenient, and is the best choice for laboratory test and small-scale production.
Parameters:
| Temperature range | ~300ºC |
| Screw diameter | 16mm, 20mm optional |
| Length ratio | 1:28 other length diameter ratios(10-30 times) optional |
| Rotation speed of screw | 0-285rpm frequency control |
| Screw material | 38CrMoAl chromium molybdenum steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the roughness Ra≤0.4μm, nitriding depth≥0.6mm, hardness HRC55~60 |
| Barrel material | 45# carbon structural steel. With the surface-layer processing of tempering, nitriding, chroming, polishing and super-precision grinding, the roughness Ra≤0.4μm, nitriding depth≥0.6mm, hardness HRC55~60 |
| Heated zone | 4 heaters at charging barrel area, 1 heater in handpiece area, external covered with safety protective wind hood. |
| Cooling device | 3 groups of multi wing fans with super static forced air cooling |
| Melt temperature | High precision melt temperature sensor monitors changes in melt temperature |
| Melt pressure | 0-40MPa high precision melt pressure sensor detects changes in head pressure, interlock loop control of the host running |
| Electric control system | PLC programmable color touch screen, man-machine interface operation system, extrusion process can be displayed and monitored dynamically, including temperature control, driving, speed, pressure, interlock and intercontrol function. |
| Safety protection | The melt pressure is interlocked with the host for overpressure alarm protection; the melt temperature is interlocked with the host for low temperature start-up protection |
| Power supply | 3∮, AC380V, 50Hz,three phase and five line |
Specification:
1.Screw/barrel material: Made of 38CrMoAl chromium-molybdenum steel.
2.Heating zone: Four mica heaters are in the area of charging barrel, one heater is in the handpiece area. Each area has a copper cooling fan covered with security wind shield.
3.Cooling facility: Three groups of multi-wing fans to cool air quietly and strongly.
4.Driving system: Precision gear reduction motor and deceleration rotation distribution integration.
5.Electric control system: PLC programmable color touch screen, man-machine interface operation system.
