Audited Supplier
Fuqin300019
Non-Customized
ISO
Yes
Yes
Plastic Ball, PP Ball, Roll on Ball
Plastic
0.5- 180 mm
Free
7-30 Days
G0 G1 G2 G3
OEM, Fuqin
Dry, Light Oil, Plastic Bag, Box and Pallet
ISO, SGS
China
Product Description
9mm Plastic PP Solid Balls
PLASTIC BALL (PP)
Plastic ball (PA66)
Plastic ball (POM)
Plastic ball (PTFE)
PLASTIC BALL (PP)
Material | Polypropylene Balls(PP) |
Size | Φ2.381mm-Φ38.1mm |
Grade | G0-G3 (±0.01-0.05mm) |
Density | Around: 0.85g/cm3 |
Feature | Has good resistance, chemical resistance, low density (density less than water), low water absorption, the highest melting point of the thermoplastic with excellent electrical insulator and low dielectric coefficient, often used for floating capacity requirements, withblood transfusion, level calibration indicator. It has a high resistance to chemical substances, such as acid, alkali, alcohol, many inorganic substances, salt solutions, solvents, gasoline, water, oil, grease, cleaning agents, fruit juices, milk and the like, but not resistant to aromatic carbon hydrogen compounds and chlorate....... |
Applications | PP ball is mainly used for transfusion, level calibration indicator. |
Plastic ball (PA66)
Material | Nylon Balls (Zytel®, Polymide--PA66) |
Size | Φ2.381mm-Φ38.1mm |
Grade | G0-G3 (±0.01-0.05mm) |
Density | Around: 1.1g/cm3 |
Feature | The nylon has preferably the alkali metal, to adapt to the neutral characteristics of petroleum products and all kinds of chemical products. |
Applications | Used in check valve, light load, the knob pull switch, low-cost, but also for better flexibility requirements, high hardness aspects |
Plastic ball (POM)
Material | DELRIN Balls (ACETAL RESIN-POM) |
Size | Φ2.381mm-Φ38.1mm |
Grade | G0-G3 (±0.01-0.05mm) |
Density | Around: 1.4g/cm3 |
Feature | Performance: it is similar to nylon, but slightly harder than nylon, slightly larger than the density recommended products applied to the required low water absorption |
Applications | POM ball table and drawer slide device is typically used, bearings, rollers, valves, and electronic apparatus, sailing apparatus. |
Plastic ball (PTFE)
Material | Balls-PTFE |
Size | Φ2.381mm-Φ38.1mm |
Grade | G0-G3 (±0.01-0.05mm) |
Feature | Based frictionless known material having excellent chemical stability, resistance to corrosion, sealing, high lubricity non-tackiness, electrical insulation and good anti-aging Stamina. Continuous use temperature range of -180 ° C to 350 ° C. PTFE , ball so excellent frictionless known to most corrosive resistant possessed electrically insulating material, |
Applications | Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument. |
