Audited Supplier
SJSZ-92/188
Lifetime Aftersale Service
12 Months
Sheet Extruder
PVC
Extrusion Machine
One Feed
Separate Type Extruder
Twin-Screw
Full Intermeshing
Deep Screw
Exhaust
Automatic
Computerized
Red and White
80/156
10-12 Tons
3 Sets
24 Hours Online
RJ
PE Film Stretching
80/156
Shandong Qingdao China
847780
Product Description
PVC IMITATION MARBLE SHEET EXTRUSION PRODUCTION LINE
PRODUCTION LINE OVERVIEW
PRODUCTION FLOW
500/1000 Mixer→Auto loader→SJSZ80/156 or SJSZ92/188 conical twin screw extruder →Mould→ Three calender(online laminating) →Edge cutter→Haul off machine→ Transversal cutter → Conveyor→UV treatment →Final PVC marble sheet
FINAL PRODUCT INTRODUCTION
1.Final product width is 1220mm,and its cutting length can be setted by machine,normally width 2440mm,2800mm and 2900mm;
2.Final product has been coated UV varnish to protect its surface and make pvc marble sheet surface with high glossy;
3.Final product surface can embossed texture,more line real marble;
4.Final product surface can be laminated PET hot stamping film and PVC film;
5.Film was laminated by three roller heating,rather than glue,so it is more environmental friendly;
PRODUCTION DESCRIPTION
NO. | NAME | QUANTITY |
1 | SJSZ-92/188 twin screw extrusion machine with feeder | 1set |
2 | Mould (1320mm) for pvc marble sheet | 1set |
3 | Three-roller calender | 1set |
4 | Temperature controller | 1set |
5 | Film lamination device | 1set |
6 | Cooling bracket | 1set |
7 | Edge cutting device | 1set |
8 | Protection film laminating device | 1set |
9 | Haul off machine | 1set |
10 | Cutting machine | 1set |
11 | Auto stacker with plate turnover | 1set |
NO.1 SJSZ80/156 CONICAL SCREW EXTRUDER
Model | SJZS 80/156 |
Material | 38CrMoAIA |
Extruding capacity | 450-500kg/h(one set) |
NO.2 MOULD
Mould type | T mould, 1350mm |
Raw material | Super mould steel specially for mould making |
Heating power | 23.8KW |
Suitable width | 1220mm |
Thickness of sheet | 1-6mm |
NO.3 THREE ROLLER CALENDER
oller specification | Φ400mm, width:1500mm. |
Drive motor | Power 1.5kw*3 (three motor can control separately ) |
Temperature constant keeping method | Independent and heating oil circular |
NO.4 TEMPERATURE CONTROLLER
Max working temperature/pressure | 180ºC; 0.8Mpa |
NO.5 FILM LAMINATING DEVICE
NO.6 COOLING BRACKET WITH EDGE CUTTING DEVICE
NO.7 HAUL OFF MACHINE
NO.8 CUTTING MACHINE
NO.9 AUTO STACKER
TECHNICAL PARAMETERS
1 | Raw material | PVC powder, calcium carbonate, stabilizer, lubricant, small materials |
2 | CaCo3 content | 1:2~3 |
3 | Apply for thickness | 2-6mm |
4 | Max useful width | 1220mm |
5 | Extrusion line with Mixer | 34m(L)*4m(W)*5m(H) |
6 | Total Project Install power | 550kw (consumption: 50-60%) |
7 | Products capacity | 14-16 tons/24hours |
FINAL PRODUCT APPLICATION
COMPANY INFO
