Pelletized Activated Carbon for Desulfurization or Denitration with ASTM Standard, Fcd Series

Pelletized activated carbon for desulfurization or denitration with ASTM standard, FCD series

Pelletized activated carbon(FCD series) for desulfurization and denitration is an extruded coal based activated carbon, used for the removal of most organic pollutant gases, against most inorganic pollutant gases, against the most harmful acidic gases, for ammonia and ammonia derivatives and separation of components of flow system.

Pelletized activated carbon(FCD series) for desulfurization is used primarily for air purification and gas separation and refinement. This carbon is a coarser mesh media and is generally used in deep bed filters where pressure drop may be concerned. Pelletized activated carbon desulfurization functions as a dual purpose media providing both filtration and adsorption.

Applications
A. Solvent recovery,
B. Gas processing and purification, especially for desulfurization and denitration
C. VOC control
D. Catalyst/support

Pelletized activated Carbon, Desulfurization or Denitration (FCD, 5.0mm series) spec:
Compressive strength: 30 kg/cm2 min     Denitration rate: 40% min
Moisture: 5.0 % max                                     Desulfurization: 25 mg/g min
Apparent density: 680--720 g/l                    PH: 7-9
Ash: 15-20% max
Size: 5.0mm

Pelletized activated Carbon, Desulfurization or Denitration (FCD, 5.0mm series) usage:
These goods through blending coal, milling in power, pressure molding, charring & activation.
Mainly using desulfurization & denitration in power plant flue gas, or removing SO2(sulfur dioxide) & dioxins in waste incineration power generation.

Pelletized activated Carbon, Desulfurization or Denitration (FCD, 10.0 mm series) spec:
Compressive strength: 40 kg/cm2 min          Denitration rate: 40% min
Moisture: 5.0 % max                                           Desulfurization: 20 mg/g min
Apparent density: 580--620 g/l                           PH: 7-9
Ash: 15-20% max
Size: 10.0 mm

Pelletized activated Carbon, Desulfurization or Denitration (FCD, 10.0 mm series) usage:
These goods are semi-coke carbon. Through blending coal, milling in power, pressure molding, charring & activation. Special pore structure, compressive strength, greater wear. Superior desulfurization, denitration performance.

The goods mainly using desulfurization & denitration in power plant flue gas, solving acid rain control in atmospheric pollution.

Pelletized activated carbon(FCD series) package: 25 kgs woven bag

Other size: 6.0mm, 7.0mm, 8.0mm, 9.0mm etc