Audited Supplier
This Bottle Blow Moulding Machine mainly produces PET plastic bottles, pure water, mineral water PET bottles, and beverage bottles. It is developed totally independently, has our own intellectual property rights, and has obtained more than 13 national patents.
FG series are the most stable two-step automatic stretch blow moulding machine. FG4 serie has four cavities and the maximum capacity of the products is 2L.The capacity can be 6800-8000BPH, It can blow bottles in shapes:Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET etc.
Features of the Blow molding Machine
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6500- 8000BPH(4-cavity)
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
| Model | FG4 | FG6 | FG8 | Remark | |||
| Mold number(piece) | 4 | 6 | 8 | ||||
| Capacity(BPH) | 6500~8000 | 9000~10000 | 12000~13000 | ||||
| Bottle specification | Max volume(mL) | 2000 | 2000 | 750 | |||
| Max height(mm) | 328 | 328 | 328 | ||||
| Round bottle max diameter(mm) | 105 | 105 | 105 | ||||
| Square bottle max diagonal(mm) | 115 | 115 | 115 | ||||
| Preform specification | Suitable inner bottle neck(mm) | 20--25 | 20--25 | 20--25 | |||
| Max preform length(mm) | 150 | 150 | 150 | ||||
| Electricity | Total installation power(kW) | 51 | 51 | 97 | |||
| Heating oven real power(kW) | 25 | 30 | 45 | ||||
| Voltage/frequency(V/Hz) | 380(50Hz) | 380(50Hz) | 380(50Hz) | ||||
Compressed air | Pressure(bar) | 30 | 30 | 30 | |||
| Cooling water | Mold water | Pressure(bar) | 4-6 | 4-6 | 4-6 | Water chiller (5HP) | |
| Temperature regulation range(°C) | 6--13 | 6--13 | 6--13 | ||||
| Oven water | Pressure(bar) | 4-6 | 4-6 | 4-6 | Water chiller (5HP) | ||
| Temperature regulation range(°C) | 6-13 | 6-13 | 6-13 | ||||
| Machine specification | Machine dimension(m)(L*W*H) | 3.3X1X2.3 | 4.3X1X2.3 | 4.8X1X2.3 | |||
| Machine weight(Kg) | 3200 | 3800 | 4500 | ||||
| Main electrics | ||||
| Pneumatic part& Cylinder | Valve | GERMAN FESTO | ||
| Electric part | PLC | JAPAN Mitsubishi | ||
| Servo System | JAPAN Panasonic | |||
| Frequency inverter | JAPAN Mitsubishi | |||
| Operating system | JAPAN Mitsubishi | |||
| Touch screen | JAPAN Mitsubishi | |||
| Blowing | Valve | JAPAN Parker | ||
| One-way Valve | GERMAN FESTO | |||
| Throttle Valve | GERMAN FESTO | |||
| Reducing Valve | GERMAN DURAY | |||
| Note: All the electrical components adopts CE,UL,CCC approved international advanced high-tech product |
The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement.
equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.
Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30% electricity consumption.
Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.
By rotary and soft preform inlet system, the speed of prefom feeding is ensured meanwhile, the preform neck is well protecte
Adopting modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts.
FG Series Optional items:
During the blowing process, if the bottle burst, bad bottles can be automatically removed.
This prevents the bad bottles from entering the filling machine.
After the bottle blowing, high-pressure air can be recycled and used again for the pre-blowing and machine physical movement.
Detection system detects temperature of oven and the temperature of performs.
When the preform temperature does not reach the set blowing temperature, blowing workstation will alarm, not blown.
Engineers in China headquarter can check the data collected and sent by the PLC anytime with the mobile ,feedback will informed to the client's site if something abnormal ,give the machine 24 hour'baby care in the cradle.
Jiangsu Faygo Union Machinery is a professional manufacturer of plastic machines.
It occupied an area of 18000 square meters. With years of development,
its products covers plastic extrusion lines,plastic blowing machine, plastic recycling machine, air compressor etc.
Stick to the company idea is making good machine, being good person,
Faygo Plast alwasy provide customers with high quality machines.
Warmly welcome to visit our factory (next to Shanghai)!
Q: Your company is a transactional company or an industrial manufacture factory?
A: We are an industrial manufacture factory which locates in Zhangjiagang city.
Q: All of your products are made by your self or compacted via purchasing the others?
A: We have independent technical team who focus on making machines, all the products are made by our technical team.
Q: What is the ability of your factory?
A: About 100 lines per month.
Q: Do you have any other services about your products?
A: We have a lot of experience on making projects and specifications for our clients, also we have a fixed service system.
Q: How do you make the quotation for clients?
A: The price depends on quality and performance but the clients should be satisfied first.
