Audited Supplier
ZQD-5L
12 Months
Pipe Extruder
PE, PP, PA, etc.
Extrusion Molding Machine
Multiple Feed
Integral Type Extruder
Twin-Screw
Exhaust
Automatic
Non-Computerized
ISO9001:2008, CE
5 Liter
Double Station
Fully Automatic
750X2 PCS/Hr
40 Days
Engineers Available to Service Machinery Overseas
ZQ
General Packing
CE & ISO 9001
HUANGYAN, CHINA
8477300000
Product Description
Plastic Container Automatic Extrusion Blow Moulding Machine Manufacturer
(Double-Station-5L)
The 2L-16L double station extrusion blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of ZQD-2L, ZQD-5L, ZQD-10L and ZQD-16L. The same as the single station machinery, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 10L, and its production capacity is 60 to 70% more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production.
Plastic Container Automatic Extrusion Blow Moulding Machine Manufacturer
(Double-Station-5L),Setting:
Clamping: Double station+Hight-precision guide+large arm cylinder axle
Extrusion system: Hard gear surface reducer+Japan inverter
Die system: Central-incoming extrusion die with special steel
Hydraulic system: Japan hydraulic valve seal and proportional control
Control system: Japan PLC+Imported HMI+PLC automatic.
Advanced processing equipment:
Introducing advanced technology form Germany,Italy,Japan etc.
Involving advanced design and production of super large-scale blow-molding machine and engineering management capability.
Holding over 40 items Patent Technologies.
Plastic Container Automatic Extrusion Blow Moulding Machine Manufacturer
(Double-Station-5L),equipment information.
Note: The specifications are subject to change without notice for the further improvement.
Note: Custom production accepted. Any client idea tried.
Plastic Container Automatic Extrusion Blow Moulding Machine Manufacturer (Double-Station-5L),picture
(Double-Station-5L)
The 2L-16L double station extrusion blow moulding machine is different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of ZQD-2L, ZQD-5L, ZQD-10L and ZQD-16L. The same as the single station machinery, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 10L, and its production capacity is 60 to 70% more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production.
Plastic Container Automatic Extrusion Blow Moulding Machine Manufacturer
(Double-Station-5L),Setting:
Clamping: Double station+Hight-precision guide+large arm cylinder axle
Extrusion system: Hard gear surface reducer+Japan inverter
Die system: Central-incoming extrusion die with special steel
Hydraulic system: Japan hydraulic valve seal and proportional control
Control system: Japan PLC+Imported HMI+PLC automatic.
Advanced processing equipment:
Introducing advanced technology form Germany,Italy,Japan etc.
Involving advanced design and production of super large-scale blow-molding machine and engineering management capability.
Holding over 40 items Patent Technologies.
Plastic Container Automatic Extrusion Blow Moulding Machine Manufacturer
(Double-Station-5L),equipment information.
| Specification | ZQD-2L | ZQD-5L | ZQD-10L | ZQD-16L | |
| Material | PE,PP^ | PE,PP^ | PE,PP^ | PE,PP^ | |
| Max.container capacity | L | 2 | 5 | 10 | 16 |
| Number of die | set | 1,2,3,4 | 1,2,3,4 | 1,2,3,4 | 1,2,3,4 |
| Output | pcs/hr | 950×2 | 750×2 | 700×2 | 600×2 |
| Machine Dimension | m | 2.7×2.0×2.5 | 3.4×2.2×2.6 | 3.9×2.3×3 | 4.9×4×3.1 |
| Total weight | ton | 4 | 6.5 | 9.5 | 10 |
| Accumulator head | ZQD-2L | ZQD-5L | ZQD-10L | ZQD-16L | |
| Number of die heating | zone | 3 | 3 | 3 | 4 |
| Power of die heating | KW | 4.2 | 5.8 | 6-7 | 6-7 |
| Max die-pin diameter | mm | 60 | 80 | 140 | 140 |
| Center distance of twin-die | mm | 130 | 160 | 240 | 260 |
| Center distance of tri-die | mm | 85 | 110 | 160 | 180 |
| Center distance of four-die | mm | 65 | 85 | 120 | 130 |
| Clamping Unit | ZQD-2L | ZQD-5L | ZQD-10L | ZQD-16L | |
| Clamping force | KN | 38 | 70 | 110 | 155 |
| platen opening stroke | mm | 135-370 | 145-510 | 230-600 | 230-600 |
| platen size | mm | 280×380 | 320×390 | 450×490 | 500×490 |
| Max mould size | mm | 300×320 | 350×370 | 520×500 | 600×500 |
| Mould thickness | mm | 135-210 | 155-300 | 235-380 | 235-380 |
| Extruder Unit | ZQD-2L | ZQD-5L | ZQD-10L | ZQD-16L | |
| Screw diameter | mm | 60 | 70 | 90 | 90 |
| Screw L/D ratio | L/D | 24:1 | 24:1 | 25:1 | 25:1 |
| Extruding Volume | Kg/hr | 60-80 | 100-120 | 130-160 | 130-160 |
| Number of heating zone | zone | 3 | 3 | 4 | 4 |
| Extruder heating power | KW | 5-6.6 | 6-8.2 | 8.2-9.3 | 8.2-9.3 |
| Extruder driving power | KW | 15-18.5 | 22-37 | 37-45 | 37-45 |
Note: Custom production accepted. Any client idea tried.
Plastic Container Automatic Extrusion Blow Moulding Machine Manufacturer (Double-Station-5L),picture
