Audited Supplier
AS290
UPVC
Male
LT / AS PER YOUR REQUEST
Master Carton, as Per Your Request
20mm, 25mm, 32mm,40mm,50mm,63mm,80mm,100mm,150mm
Taizhou Zhejiag China
39174000
Product Description
System: Insulating electrical conduit/pipe and fittings system.
Scope: Electrical conduit provides very good protection to enclosed conductors from impact, moisture, and chemical vapors. Varying numbers, sizes, and types of conductors can be pulled into a conduit, which simplifies design and construction compared to multiple runs of cables or the expense of customized composite cable. Wiring systems in buildings may be subject to frequent alterations. Frequent wiring changes are made simpler and safer through the use of electrical conduit, as existing conductors can be withdrawn and new conductors installed, with little disruption along the path of the conduit.
Specification: This Standard specifies general requirements for both metallic and non-metallic conduits and fittings used to protect cables in electrical installations. Mechanical properties, electrical characteristics and material requirements are covered.
Referenced Standards: AS/NZS2053 Standard
Des.: Straight Glands
Size : 20mm , 25mm , 32mm , 40mm, 50mm, 63mm, 80mm, 110mm, 125mm, 150mm
Duty: HD (Heavy duty) , MD(Medium duty) ,LD (Light duty)
Color: Black , Orange ,Grey ,White ,Green . As per your request .
Detail Drawing:
More Information about this series :
We also make Conduit and all kinds of fittings .such as ELBOW , TEE, COUPLING and so on .
Certification : SAI
About Us:
Zhejiang Liutong Plastic Co., LTD was established in 1994. We are one of the largest manufacturers in East-South of China, We specialized in PVC & PPR & CPVC products, such as PVC Resin, PVC-U (Unplasticized polyvinyl chloride) drainage pipe and fittings, PVC-U water-supply pipe and fitting, Rigid PVC conduit and fittings, PPR pipe and fittings, plastic valves, CPVC pipe and fittings and so on .
We are located in Huangyan city, Zhejiang Province, a famous place for plastic products and plastic injection mould in china, with superior geographical location and convenient transport conditions. Factory area is 50,000 square meters. Especially, company owns many excellent employees in different department and have over 26 years experience in PVC products. Liutong Plastics ranks the leading position among so many competitors due to product quality , competitive price and product variety.
The Corner of Workshop:
We have 80sets of injection machines ,30sets of extruding machines.
Strong research and developent department ,Professional QC team .
Rich store , fast delivery .
FAQ
1.What is your MOQ?
Our MOQ is usually 1 CTN.
2.What is your delievery time?
The time of delievery is around 15-20days. (Less than 10ctns is around 3-5days)
3.What is the shipping port?
We ship the goods via Ningbo or Shanghai port.
4.What is your payment terms?
We accept 30% T/T in advance,70% in the period of shipment .
5.How should I contact you?
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.318020
If you would like to have a visit, you are much welcome.
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 We made business with AUSTRALIA market more than 20years .
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.
Contact Us:
ZHEJIANG LIUTONG PLASTIC CO.,LTD.
Add.: No.6,GongXin Rd.West Industrial Area Huangyan Taizhou City,Zhejiang China 318020
Sales Manager: Rose
Scope: Electrical conduit provides very good protection to enclosed conductors from impact, moisture, and chemical vapors. Varying numbers, sizes, and types of conductors can be pulled into a conduit, which simplifies design and construction compared to multiple runs of cables or the expense of customized composite cable. Wiring systems in buildings may be subject to frequent alterations. Frequent wiring changes are made simpler and safer through the use of electrical conduit, as existing conductors can be withdrawn and new conductors installed, with little disruption along the path of the conduit.
Specification: This Standard specifies general requirements for both metallic and non-metallic conduits and fittings used to protect cables in electrical installations. Mechanical properties, electrical characteristics and material requirements are covered.
Referenced Standards: AS/NZS2053 Standard
Des.: Straight Glands
Size : 20mm , 25mm , 32mm , 40mm, 50mm, 63mm, 80mm, 110mm, 125mm, 150mm
Duty: HD (Heavy duty) , MD(Medium duty) ,LD (Light duty)
Color: Black , Orange ,Grey ,White ,Green . As per your request .
Detail Drawing:
More Information about this series :
We also make Conduit and all kinds of fittings .such as ELBOW , TEE, COUPLING and so on .
Certification : SAI
About Us:
Zhejiang Liutong Plastic Co., LTD was established in 1994. We are one of the largest manufacturers in East-South of China, We specialized in PVC & PPR & CPVC products, such as PVC Resin, PVC-U (Unplasticized polyvinyl chloride) drainage pipe and fittings, PVC-U water-supply pipe and fitting, Rigid PVC conduit and fittings, PPR pipe and fittings, plastic valves, CPVC pipe and fittings and so on .
We are located in Huangyan city, Zhejiang Province, a famous place for plastic products and plastic injection mould in china, with superior geographical location and convenient transport conditions. Factory area is 50,000 square meters. Especially, company owns many excellent employees in different department and have over 26 years experience in PVC products. Liutong Plastics ranks the leading position among so many competitors due to product quality , competitive price and product variety.
The Corner of Workshop:
We have 80sets of injection machines ,30sets of extruding machines.
Strong research and developent department ,Professional QC team .
Rich store , fast delivery .
FAQ
1.What is your MOQ?
Our MOQ is usually 1 CTN.
2.What is your delievery time?
The time of delievery is around 15-20days. (Less than 10ctns is around 3-5days)
3.What is the shipping port?
We ship the goods via Ningbo or Shanghai port.
4.What is your payment terms?
We accept 30% T/T in advance,70% in the period of shipment .
5.How should I contact you?
6.What is the location of your company?
Our company is located in the Taizhou Zhejiang Province,China.318020
If you would like to have a visit, you are much welcome.
7.How about the samples?
We could send you the samples ,most samples are free to send to most places in China.If sent to other countries,transport fee shoule be paid by you.
8.Why choose us?
1 Genuine produces with excellent quality and competitive price.
2 Cooperating with the customers all over the world and knowing the markets very well.
3 We made business with AUSTRALIA market more than 20years .
4 After- Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.
Contact Us:
ZHEJIANG LIUTONG PLASTIC CO.,LTD.
Add.: No.6,GongXin Rd.West Industrial Area Huangyan Taizhou City,Zhejiang China 318020
Sales Manager: Rose
