Audited Supplier
C804C-100
Aluminum Alloy
Mechanical
0.6MPa
Flanged
-20~+70ºC
FULIU
Carton
4"
China
8481804090
Product Description
| 1 | Material of Body | Aluminium Alloy |
| 2 | Material of Sealing Ring | FKM |
| 3 | Design Pressure | 600 Kpa |
| 4 | Driver Type | Pneumatic |
| 5 | TEMP. RANGE | -20~+70ºC |
Product Description
Emergency Shut Valve is installed on the bottom of the tanker, the top parts is tightly sealed inside the tanker. External shear groove design limits product spillage when the tanker is crashed down, it will automatically cut of itself via this groove under the situation there's no affectation on the sealing. This will efficiently protect the over rolled tanker from leakage to ensure the safety when transportation. This products is suitable for eater, diesel, gasoline and kerosene and other light fuel, etc.
Structure
The bottom valve made of valve cover, strainer, spring, valve clack and valve body.
Benefit and Features
1. Emergency Shut
When hit by a powerful collision, the valve body fracture in emergency to self-cut groove the place, and keep the tank sealing, to prevent oil leakage.
2.Emergency Shut Down
When the temperature of the environment in the process of work due to reasons such as the fire increases to the prescribed scope, with the help of a fusible element can automatically close the valve.
3. Emergency Open
When start an open valve, dismantling emergency open hole fusible original, replace M12X100 hex bolt can be emergency open valve.
4. Special Surface Treatment
The whole valve body is passed a special surface process to improve the anti-corrosion.
5. Hydrodynamic Body
Design and high lift poppet minimizes pressure drop to give maximum flow rate.
6. Two ways-Operation
If need, can be installed a outernal cylinder to do the pneumatic control.
Use and maintenance
1. Installment
1.1 Bottom valve and pipeline connection flange can provide round flange and the method for customers to choose
1.2 Bottom valve before installation, please clean the inside and piping, ensure that the inside and no particulate matter in the pipeline, so as not to damage the valve seal
Using
When shipment thickens oil(for example Crude oil), can remove the valve on the mesh, so as not to affect the flow.
Maintain
Not regularly check the intake pipe or cable damage, to avoid airway problems that cannot be normally open valve
