MadeInChina.com > Chemicals > Paint & Coating > Building Coating

Polyurethane High Density Closed Cell Polyurethane Foam High Pressure Flexible PU Polyurethane Foam Spray Foam Insulation Polyurethane

Price	$3.00 Compare
Min Order	1000 kg
Availability	In Stock
Shipping From	Shandong, China
Popularity	327 people viewed
Quantity	+-

Jinkung Industrial (Shandong) Corporation

Audited Supplier 3 years

Profile Certified by SGS/BV

Shandong, China
Luna Zhang (Ms.)

Visit Homepage Product Catalog

Product Detail
Contact Supplier

CAS No.:

9009-54-5

Formula:

-Nhcoo-

EINECS:

210-898-8

Color:

Black or Yellow

Appearance:

Liquid

Main Raw Material:

Polyurethane

Method:

Spray

Level:

Finish Coat

Drying Method:

Air Drying

Certification:

ISO14001, CCC, RoHS, ISO9001

Substrate:

Ceramic , Wood , Stone , Glass

Components:

Film Forming Matter

Formation Mechanism:

Conversion Type

Trademark:

HIGHTOP

Transport Package:

200L Drum

Specification:

A & B

Origin:

Shandong China

HS Code:

3907299090

Product Description

Polyurethane Spray Machine Closed Cell Spray Foam Pu Cord Jointing Machine Open Cell Spray Foam Insulation Kit

pu polyurethane spray foam closed cell raw material for spray insulation DQT-501C is spray blend polyols, blowing agent is 365mfc/245fa instead of HCFC-141B, it reacts with iso-cyanate to produce foam which has excellent performances, which are as follows: 1) fine and uniformity cells 2) low thermal conductivity 3) good low temperature dimensional stability. It applies to all kinds of thermal insulation engineering which uses the spray technology, such as cold rooms, pots, large-scale pipelines and construction metope etc.

200L/drum, 4 drums per pallet, 80 drums for one 20ft container.

Foam Performances
items	Test Method	Index
Spray Density	GB 6343	>40kg/m3
Closed-cell Rate	GB 10799	≥90%
Initial Thermal Conductivity(15ºC)	GB 3399	≤24mW/(m.K)
Compressive Strength	GB/T8813	≥150kPa
Adhesive Strength	GB/T16777	≥120kPa
Elongation at break	GB/T9641	≥10%
Dimentional Stability 24h -20ºC	GB/T8811	≤1%
24h 70ºC		≤1.5%
Water Absorption	GB 8810	≤3%
Oxygen Index	GB 8624	≥26

Advantage of polyurethane spray foam insulation machine PU Foam Polyurethane insulation raw material 1. The cylinder solenoid valves are all imported, more expensive than the common cylinders. 2. Free on-line training for technology, full way tracking and testing, high sales volume. 3. All accessories are supplied by the original manufacturer and are available to customers at cost price 4. The high pressure pipe is anti-corrosion. 5. The temperature control meter is dual display, which can display the actual temperature and the set temperature. Other manufacturers can only display the set temperature and can not see the actual temperature. Red meter shows the actual temperature, green shows the set temperature 6. The operation temperature control panel is independent module which can be replaced separately. For other factories ,there is an integrated board next to the temperature control table,if one is broken ,others temerature meters all should be changed . Learn to maintain machine : Main Machine Daily Use and Maintenance: 1 Replace DOP in oil cup of primary-secondary pump daily; 2 When equipment stops running, swerve Start/Reset switch to reset direction, making sure cylinder rod fully soaked inside DOP liquid, in this way it can prolong service life of seal ring. 3 Check sensitivity of the equipment heating system, if anything goes wrong, please fix the problem as soon as possible. 4 When equipment isn't working, please turn off heating system timely, for not only it prevents potential danger also avoids low foaming quality cuz polyol material long-time heating. 5 Make sure turning on and off heating system in correct order. When turning on, first start main power,then turn on heating system; when turning off, first stopping heating system then turning off main power.