Audited Supplier
HDGC3980
1 Year
1 Year
Storage Battery Tester
Charge and Discharge
Lead-acid Battery
Customized
0~100A
DC 88-132V
Single Main Unit, Parallel Master Mode, Parallel S
RS485 Interface, USB Interface
HD Power
Wooden Box with Foam Inside
Made in China
9030899090
Product Description
General information
HDGC3980 Battery Discharge Tester can be used as the discharge load in the battery off-line state to realize the constant discharge at the set value by regulating continuously the discharge current. This tester system is simple, safe and accurate for monitoring voltage of cells adopting wireless connection.
Features
1.PTC ceramic resistor is adopted to avoid the red heat phenomenon for a safer discharge process.
2.Cell monitoring module is performed the voltage commission by remote radio wireless communication mode, it can set up to four unique frequency brands.
3.Wireless acquisition box can monitor each cell for monitoring the whole process of battery series. There are three data monitoring methods.
4.Each tester can monitor 25 cell monitoring mode , every cell monitoring mode can connect 12 battery ,monitoring in total of 300 battery.
5.Cell voltage value can be displayed by sliding table and sliding bar chart and searched by two data .
6.Connected with USB interface,the data of the discharge process can be record to U disk and transformed to PC by U disk . PC data manage software can analyze the discharge process and generate the corresponding data for more convenient storage .
7.Intelligent SCM ARM control, 7inch 1024*600 LCD screen , capacitive touch operation, built in English menu, simple and clear operation menu.
8.Automatic self-protection stop function,over-heat protection,over voltage protection,over current protection and reverse connection protection,alarm prompt is displayed on the screen once it appears any issue, air circuit breaker automatically cut off.
9.It can perform on-line compensated charge/discharge, and can also carry on discharge test for on-line working storage battery by connection external current clamp sensor,which is convenient for measurement work.
10. RS485 remote control charge , discharge and activation functions .
11. It has the function of charge, discharge and activation with muti machine parallel mode by only operating in the display screen of the parallel instrument with parameters as the master.
Technical Parameter
HDGC3980 Battery Discharge Tester can be used as the discharge load in the battery off-line state to realize the constant discharge at the set value by regulating continuously the discharge current. This tester system is simple, safe and accurate for monitoring voltage of cells adopting wireless connection.
Features
1.PTC ceramic resistor is adopted to avoid the red heat phenomenon for a safer discharge process.
2.Cell monitoring module is performed the voltage commission by remote radio wireless communication mode, it can set up to four unique frequency brands.
3.Wireless acquisition box can monitor each cell for monitoring the whole process of battery series. There are three data monitoring methods.
4.Each tester can monitor 25 cell monitoring mode , every cell monitoring mode can connect 12 battery ,monitoring in total of 300 battery.
5.Cell voltage value can be displayed by sliding table and sliding bar chart and searched by two data .
6.Connected with USB interface,the data of the discharge process can be record to U disk and transformed to PC by U disk . PC data manage software can analyze the discharge process and generate the corresponding data for more convenient storage .
7.Intelligent SCM ARM control, 7inch 1024*600 LCD screen , capacitive touch operation, built in English menu, simple and clear operation menu.
8.Automatic self-protection stop function,over-heat protection,over voltage protection,over current protection and reverse connection protection,alarm prompt is displayed on the screen once it appears any issue, air circuit breaker automatically cut off.
9.It can perform on-line compensated charge/discharge, and can also carry on discharge test for on-line working storage battery by connection external current clamp sensor,which is convenient for measurement work.
10. RS485 remote control charge , discharge and activation functions .
11. It has the function of charge, discharge and activation with muti machine parallel mode by only operating in the display screen of the parallel instrument with parameters as the master.
Technical Parameter
| Suitable Battery | DC 110V |
| Model No. | HDGC3980 |
| Discharge current | 0~100A |
| Discharge Voltage | DC 88-132V |
| Working mode | Single main unit, parallel master mode, parallel slave mode, and remote controlled mode |
| Protection performance | Over-voltage protection, under-voltage stop, over-current protection, reverse wiring protection, 65ºC over-temperature protection, LCD prompt and buzzer alarm |
| Cell voltage collection (optional) | Multi-band RF wireless module for communication distance of more than 100m, compatible with 2V/4V/6V/12V cell monitor module , 1-25 groups of RF wireless monitoring modules up to 300 batteries, and single wireless monitoring module for monitoring 12 cells |
| Control precision | Discharge current≤±1%; group voltage≤±0.1%; cell voltage≤±0.5% |
| PC communication | RS485 interface, USB interface |
| Work Environment | |
| Heat radiation | Forced air cooling |
| Temperature | Working rage: -5-50ºC Storage temperature: -40-70ºC |
| Humidity | Relative humidity 0-90% (40±2ºC) |
| Elevation | Below 4,000m |
| Noise | <75dB |
| Working Power Supply | |
| Voltage | Power supply: single-phase AC220V (-20%-+30%), frequency: 45-65Hz; |
| Electric strength test | Input-shell: 2200Vdc 1min Input-output: 2200Vdc 1min Output-shell: 700Vdc 1min |
| Safety | Compliance with EN610950 |
