Audited Supplier
KM-91Z-2
CE, ISO
New
Customized
Automatic
Horizontal
Hydraulic Hose Crimping Machine Km-91z
1/8"-1 1/4" 2 Two Spirals
99mm
Special Steel
Within3s
Within 8s
160kg
640*480*660(mm)
Kangmai
Standard Export Plywood Case
Approved CE and ISO
Handan, China
8479819000
Product Description
Specifications of hose crimping machine KM-91Z-2| Crimping range | 1/4"-1 1/4" |
| Standard voltage&motor: | 380V/3kw |
| Opening without dies | φ104mm |
| Opening | ≥21mm |
| Cycle time | 3s/8s |
| No.of standard die sets | 8 sets |
| Oil tank | 40L |
| Crimping force | 400T |
| System pressure | 30Mpa |
| Machine weight | 160 kg |
| Machine size | 640mm*460mm*670mm |
Standard Die Size of Hose Crimping Machine KM-91Z-2
| Die bore | 15mm | 18mm | 20mm | 23mm | 26mm | 29mm | 37mm | 46mm |
| Length | 65mm | 65mm | 65mm | 65mm | 65mm | 65mm | 65mm | 78mm |
| Hose ID | 6mm | 8mm | 10mm | 13mm | 16mm | 19mm | 25mm | 32mm |
Applications of Hydraulic Hose Crimping Machine KM-91Z-2
1).Suitable for high precision pressing of low and high pressure hose from 1/8 inch to 1 1/4 inch internal hose pipe.
2).Used rubber hose to transmit hydraulic pressure as there working power.
3).Used in Building Construction, Petroleum Industry, Chemical Industry, Car and motor Industry.
Hydrauli Hose Crimping Machine Why Not Choose Kangmai?
1). Kangmai hose crimper has approved CE & ISO and audited by SGS.
2). The fitting and hoses crimped by kangmai machine never leak or broken. The reason are like below:
(a)The machine head process by CNC machine, roundness and taper is within 0.1mm.
(b)The machine die base and dies adopt special die steel and process by advances craft,the hardness is above 55HRC. The die hardness is enough so that the die life is very long and easy to crimp high pressure hydraulic hose, such as 4SP even 6SP.
(c)The technical of machine head is forging not cast. Casting is cheap but has small hole on the machine head. The piston will divide from casting machine head.
3). Strictly testing and inspetion.
(a) for raw material, we will check again by our inspector as per international standard. Only the raw material reach to international standard and allow enter kangmai facotry.
(b) for hydraulic and eletrical parts, such as valve, pump, motor and so on, we use famous brand both from China and abroad.However, we will check again when these parts enter our facotry.
(c) before the hose crimping machine enter our warehouse, the inspector check the machine roundess, taper, opening, speed, noise, apprance and so on. Only each parts is up to standard of ISO, CE standard, the machine can enter the warehouse.
(d) when the machine package, the inspector the dies, the package and other parts of clients requriment. Everything is ok, the inspector signed and machine allow to go out the facotry.
