Audited Supplier
Model: TTR-BB101 (Better cooling design, AC Power or with battery inside)
Brief Introduction of TTR Tester
The power transformer shall be regularly tested for turns ratio or voltage ratio, including semi-finished products and finished products in the production process, transformers before putting into operation and during operation in the power system. The traditional transformation ratio bridge is cumbersome to operate, the reading is not intuitive, the necessary conversion is needed, and the test results only reflect one phase transformation ratio. The instrument overcomes the shortcomings of the traditional transformation ratio bridge test, completes the three-phase transformation ratio test at one time, has fast test speed and high accuracy, and greatly improves the test efficiency.
Advantages: Wide test range up to 10000, Better cooling design, Blind measurement of transformation ratio, group test, tap position test, etc.
Technical Parameters of transformer TTR tester
| Model | TTR-BB101 Single and Three Phase Transformer Ratio Testing Kit | |
| Measuring Range | 0.9~10000 | |
| Accuracy | 0.9~500 | ±(0.1%±2 digit) |
| 500~2000 | ±(0.2%±2 digit) | |
| 2000~4000 | ±(0.3%±2 digit) | |
| 4000~10000 | ±(0.5%±2 digit) | |
| Resolving power | minimum 0.0001 | |
| Output voltage | 160V/10V (Autoshift) | |
| Working power | AC220V±10%,50HZ(Don't use the generator) | |
| Working temperature | -10ºC~40ºC | |
| Relative humidity | ≤80%RH No condensation | |
Battery inside TTR is optional
Power Supply:
AC mode--External AC power supply AC220V ± 10%, 50Hz is required. (Do not use the generator)
DC mode--No external power supply is required (the instrument has its own lithium battery).
New Design, more convenient operation for transformer ratio testing
Suitable for single phase, three phase, and Z-type power transformerSingle Phase power transformer and PT (Voltage Transformer) Ratio testingThree Phase power transformer turns ratio testing wiring
Features and Advantages of Transformer Ratio Testing Kit
1.The test range is wide, up to 10000.
2.The test speed is fast, and the single-phase test is completed within 5 seconds.
3.Z-connection transformer test.
4.It has the functions of blind measurement of transformation ratio, group test, tap position test, etc.
5. No power offclock and date display, data storage function (50 groups of test data can be stored).
6.High and low voltage reverse connection protection function.
7.Transformer short circuit and inter turn short circuit protection function.
8.Thermal printer output function, fast and silent.
9.Small size, light weight and easy to carry.
Similar Transformer TTR Tester:
TTR-6810F Handheld Transformer Ratio Meter TTR-6810A Portable Transformer Turns Ratio Tester
Lucyelec Test Equipment Co., Ltd. engaged in oil Analysis and electrical test equipment since 2015, is your reliable partner and professional provider of test and measurement instruments in Baoding China.
Main Products:
1. Oil Test kits (BDV, Tan Delta, Flash Point, Water content, Interfacial Tension, Gas Chromatography, Kinematic Viscosity… etc)
2. Transformer testers /CT PT analyzer (TTR, Winding resistance, Winding deformation, Capacitance and tan delta test, Partial dicharge, etc)
3. SF6 Gas Analyzers (Dew point, Purity, Compensation, etc)
4. Switch/Circuit breaker analyzers (Contact resistance, Mechanical characteristics)
5. MOA/Insulator test devices
6. HV Hipot Testers (AC/DC/VLF)
7. Insulation/Earth resistance test
8. Secondary Injection Relay Test Sets
9. Cable fault location system
10. DC System/Battery Testers
11. Electric safety tools and test equipments
Lucyelec Test Equipment Factory Workshops:
Lucyelec Customer Visit:
If you have any inquiry about quotation or cooperation, please contact Lucyelec. Our sales representative will reply you within 24 hours. Thank you for your interest in our products.
