Audited Supplier
2028
Core Drill
Metal Drilling
GB/T 19001-2016/Is0 9001:2015
13.44
8
2.0
2.2
2.4
TANK
Carton
2.561kg
China
Product Description
| Planar composite sheet | |||
| NO.L/LT/LTA | Size(mm) | ||
| diameter±0.3 | Height±0.1 | Thickness±0.2 | |
| 0808 | 8.2 | 8 | 1.5 |
| 1008 | 10 | 8 | 1.5 |
| 1303 | 13.44 | 3.53 | 1.5 |
| 1308 | 13.44 | 8 | L:2.0 LT:2.2 LTA:2.4 L: diameter protection; inner cone LT: main cutting; used in medium or soft formations LTA: main cutting; used in hard rock formations |
| 1313 | 13.44 | 13.2 | |
| 1608 | 15.88/16.05 | 8 | |
| 1610 | 15.88/16.05 | 10 | |
| 1613 | 15.88/16.05 | 13.2 | |
| 1616 | 15.88/16.05 | 13.2 | |
| 1908 | 19.05 | 8 | |
| 1913 | 19.05 | 13.2 | |
| 1916 | 19.05 | 16 | |
| 1919 | 19.05 | 19.05 | |
| Profiled composite sheet | |||||
| NO. | Size(mm) | Applicable fields | |||
| diameter | Height | Thickness | |||
| Arc surface cutters | 1304 | 13.44 | 4.5 | 3.0-3.5 | Soft-hard homogeneous rock geology/- coal mine drill bits |
| 1308 | 8 | ||||
| Ridge cutters | 1304 | 4.5 | |||
| 1308 | 8 | ||||
| Triangular shape cutters | 13 | / | |||
| 16 | |||||
| 19 | |||||
| Composite cutters | 9.4*9.4*8 | 2 | Chain saw cutting | ||
| 12.7*12.7*8 | |||||
Our advantages
01,0ptimization of interface structure and improvement ofinterface stress
02,Reasonable material selection and unique manufacturing process to create high-quality products
03,The diamond layer is combined with the cemented carbide layer, which is sharp and has high penetration rate
4,Optimize the process or remove Co to increase high impact toughness and thermal stability
5,Implement customized products according to customer needs
6,High cost performance
02,Reasonable material selection and unique manufacturing process to create high-quality products
03,The diamond layer is combined with the cemented carbide layer, which is sharp and has high penetration rate
4,Optimize the process or remove Co to increase high impact toughness and thermal stability
5,Implement customized products according to customer needs
6,High cost performance
The planar cutters mainly adopts a D-D key/12 petal type joint surface, whichhas high wear resistance and impact resistance, and is used in coal mines,shale qas, or conventional geological drilling, or oil and unconventional energydrilling in soft to hard complex formations with certain abrasiveness.
In addition to being used for drilling tools, special-shaped cutterscan also be used as cutting tools.
The specific structure can be customized and designedaccording to customer needs.
In addition to being used for drilling tools, special-shaped cutterscan also be used as cutting tools.
The specific structure can be customized and designedaccording to customer needs.
