Audited Supplier
21G11
Electrical Insulation
Blue
PVC
20KV~100KV
0-80
19mm
4.9mils (0.125mm+-10%mm)
11 Lbs./in. (19.6n/10mm)
150%
14 Oz./in. (1.6n/10mm)
40kv/mm
Yes
OEM/ACHEM WONDER
Carton/Pallet
0.13MMX19MMX9.1M
China
39191099
Product Description
DESCRIPTION: No. 21G11 Vinyl Electrical Insulating Tape
FEATURES: A Shiny surface PVC tape coated with a rubber-based adhesive.
Outstanding adhesion and conformability, flame retardant.
It is a low lead and low cadmium content product.
It is used for electrically insulate joints and splices in wires and cables.
The physical and performance properties shown are averages obtained from tests
recommended by ASTM D-1000, or our own procedures. A particular roll may vary slightly from
these averages and it is recommended that the buyer determine the suitability for his own
purposes.
1. Sample Free?
Re: We provide samples for free, but you need to bear the express cost.
2. Can our private logo/label be printed on the packaging?
Re: Yes, your own private logo/ label can be printed on the packaging upon your legal authorization, we support OEM service according to our clients' requirement for many years.
3. When can I get the price?
Re:We usually quote within 24 hours after getting your inquiry if you are urgent to get the price. Please call us or tell us
by email so that we will take your inquiry as prior.
4.What materials need to be provided to get an accurate quotation?
Re:You need to provide the length, width, thickness and quantity of the product. We will provide you with the best price
through the information you provide.
5.what's your payment terms?
Re:Payment terms: TT 30% deposit advance,70% Balance before shipping
Lead time:15-20 workdays after deposit confirmed
Shipping ways:By sea,By Air,By DHL ,Fedex
FEATURES: A Shiny surface PVC tape coated with a rubber-based adhesive.
Outstanding adhesion and conformability, flame retardant.
It is a low lead and low cadmium content product.
It is used for electrically insulate joints and splices in wires and cables.
The physical and performance properties shown are averages obtained from tests
recommended by ASTM D-1000, or our own procedures. A particular roll may vary slightly from
these averages and it is recommended that the buyer determine the suitability for his own
purposes.
| Total Thickness: | 4.9mils (0.125±10%mm) |
| Tensile Strength : | 11 lbs./in. (19.6N/10mm) |
| Elongation at Break : | 150% |
| Adhesion to Steel: | 14 oz./in. (1.6N/10mm) |
| Flame Retardant | YES |
1. Sample Free?Re: We provide samples for free, but you need to bear the express cost.
2. Can our private logo/label be printed on the packaging?
Re: Yes, your own private logo/ label can be printed on the packaging upon your legal authorization, we support OEM service according to our clients' requirement for many years.
3. When can I get the price?
Re:We usually quote within 24 hours after getting your inquiry if you are urgent to get the price. Please call us or tell us
by email so that we will take your inquiry as prior.
4.What materials need to be provided to get an accurate quotation?
Re:You need to provide the length, width, thickness and quantity of the product. We will provide you with the best price
through the information you provide.
5.what's your payment terms?
Re:Payment terms: TT 30% deposit advance,70% Balance before shipping
Lead time:15-20 workdays after deposit confirmed
Shipping ways:By sea,By Air,By DHL ,Fedex
