Audited Supplier
piston
1 Year
1 Year
Axial Plunger Pump
Single Cylinder
Hydraulic Driven Reciprocating Pump
yinghua
20*20*20cm
China
Product Description
Ceramic pump components include pistons, plungers, wear plates, bushes, liners and sleeves and mechanical and chemical seal rings. The material is such as super pure Allumina, TZP, etc.
We produce this product by Advanced process technologies, we know how to manage the critical parameters to produce the best quality products. We can machine the components to very close tolerances and can give a high surface finish of Ra<0.2 microns. This speaks volumes about our technical capabilities.
With the properties of high hardness, high strength, high wear and chemical corrosion resistance, low expansion coefficient, they are advanced in aplication such as:
1) Increase of operation life;
2) Reduction of engine noise;
3) Decrease of fuel consumption and exhaust pollution.
These are typically used in jet pumps, water jetting pumps, high pressure pumps and high pressure water supply pumps, which find tremendous applications in industries including automobiles, chemical and petrochemicals, foundries, oil refineries, paper and pulp manufacture, cement manufacturing, food processing, thermal power plants and steel plants etc.
We produce this product by Advanced process technologies, we know how to manage the critical parameters to produce the best quality products. We can machine the components to very close tolerances and can give a high surface finish of Ra<0.2 microns. This speaks volumes about our technical capabilities.
With the properties of high hardness, high strength, high wear and chemical corrosion resistance, low expansion coefficient, they are advanced in aplication such as:
1) Increase of operation life;
2) Reduction of engine noise;
3) Decrease of fuel consumption and exhaust pollution.
These are typically used in jet pumps, water jetting pumps, high pressure pumps and high pressure water supply pumps, which find tremendous applications in industries including automobiles, chemical and petrochemicals, foundries, oil refineries, paper and pulp manufacture, cement manufacturing, food processing, thermal power plants and steel plants etc.
| Constituents (%) | ZrO2 Y2O3 | 94.6 5.25 |
| Density | g/cm³ | 6.05 |
| Open Porosity | % | 0 |
| Hardness Vickers | Hv | 1250 |
| E modulus | Gpa | 200 |
| Bending strength (4-point) | MPa | 1300 |
| Fracture strength | MPa*m1/2 | 8 |
| CTE(20~4000C) | *10-6/ K | 9.6 |
