

| Inside Dimension | 9200*4500*3500mm(L*W*H) |
| Outside Dimension | 9344*6396*4100mm(L*W*H) |
| Wall Panel | Thickness:70mm,width:1150mm,tongue and groove interlock structure,with polystyrene(EPS) insulation inside, colour:white |
| Doors | Folding door,3 folds main door,3500*3400mm(W*H),galvanized steel cover frame,with polystyrene(EPS) insulation inside,colour:blue,escape door:1 unit,800*2000mm(W*H),colour:white |
| Basement | Without basement,2 rows of pits in the ground for exhaust air,dimension of each pit is 6900*760mm(L*W),with galvanized grilles made by twisted steel and flat bar above |
| Intake air system | 2*7.5KW double-intake centrifugal fans for intake air,model is YDW4.5M,total air capacity is 42000m³/h |
| Exhaust air system | 1*11KW double-intake centrifugal fans for exhaust air, external motor, belt-drive,model TAE-710H,air capacity is 36000m³/h |
| Damper actuates | Manual damper actuates from spraying to baking cycle,manual damper for exhaust air |
| Heating system | RIELLO RG5S diesel burner,stainless steel heat exchanger.Max. heating productivity:260000Kcal/h.Max.working temperature:80ºC |
| Filter system | Pre-filter,ceiling filter,exhaust fiberglass filter,activated carbon filter |
| Filtering area | 31m2 |
| Lighting system | Ceiling lights:12 units*4pcs=48pcs*36W,with electronic ballasts. Side lights:12 units*4pcs=48pcs*36W,with electronic ballasts |
| Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator,thermostat, power supply switch, emergency stop, amperemeter, voltmeter,hour meter,temperature limit controller,pressure gauge,exhaust reduction voltage motor start |
| Total power | 30.5KW |










Audited Supplier










