Audited Supplier
metal shredder
Scraping is the use of crushers to break the scrap, the use of sorting system for sorting the broken scrap to get a pure high-quality scrap processing methods. Its working principle is in the high-speed, high-torque motor continuous drive, the crusher on the rotor hammer hit into the cavity within the scrap, under strong impact, the scrap was torn and squeezed into a certain size of the broken Steel, and then by the sorting equipment, you can get high purity high-quality crushed steel.
Characteristics of scrap metal shredder:
It is scientifically designed and reasonably configured following customized schemes on customers' field, output, material types and so on. It is high in automation:
- Monitored by computer, PLC control, safe, high-efficient, conservation of labor;
- Remote diagnosis, round-the-clock nonstop aftersales services;
- Over 90% are produced by the component company; strict ISO quality management system helps ensure quality; quality materials are used for key components; it has exquisite techniques that are more solid and durable;
- All-out environmental supporting facilities on shock absorption, noise reduction and dust removal help bring down second-time pollution;
- Imported separation devices are configured following demands, which boost separation efficiency and largely increase economic efficiency.
Material to be shredded :
1, whole or flattened car bodies(remove tires , gas tank , engines and gear box)
2, Tin plate material
3, Electrical appliances without motors, compressors
4, Bicycles and similar materials
5, Empty tank (without liquid materials and paintings )
6, Aluminum cans/aluminum waste
7, Other light metal with thickness less than 6mm
Features of the shredder machine:
1,The shredder machine uses Casting high manganese(ZGMn18Cr2Mo) liner on its internal surface, ensuring outstanding durability.
2,The shredder body is equipped with a hammer/pin removal device. Hammers and pins can easily be changed.
3,The body casing can be widely opened with 2 hydraulic cylinder, ensuring easy maintenance and inspection.
4,the upper body casing serves as uncrushable oulet with 2 hydraulic cylinder, minimizing internal damage caused by uncrushable material.
5,Paint, oil and dust flakes or sheds off scrap during crushing process, making it possible to recover high purity iron.
Scraps that can't be disposed:
1. Wire cable 20 mm in thickness and over 7.5 meters in length;
2. Alloy steel with radius longer than 25 mm;
3. Low-carbon steel with radius longer than 37 mm;
4. Steel plate with thickness surpassing 20 mm and side length surpassing 300 mm;
5. Steel plate with thickness surpassing 25 mm and side length surpassing 1500 mm;
6. structural material with section larger than 10mm;
7. Structural materials with section larger than 10mm;
8. Reinforcing steel bar with radius longer than 30mm;
9. High-carbon round steel with radius longer than 12mm;
10. Steel ingot, billet and similar materials;
Scraps that can be disposed:
1. Scrap small automobiles that are pressed or that are not pressed (excluding vehicle axle and engine)
2. Light and thin burden with density no higher than 1t per cubic meters after shearing or pac.
3. Household appliances: such as old washing machine, refrigerator, air-conditioners and so on.
