Audited Supplier
AT
1 Year
Slag Separator
Fourdrinier Wire
Normal Specification Paper
Automatic
CE
Customized
New
1 Year
Reject Sorter
Separate Paper Pulp Slag
Cast Iron
480mm
1-3.5%
15-20%
2-3.5mm
40-50t/D
55kw
Aotian
Standard
customized
Henan, China
84391000
Product Description
Pulping Equipment Slag Magnetic Separator Ceramic Slag Separator Reject
1. The base is made of pressed carbon steel, welded, and annealed to eliminate internal forces to prevent deformation, and the part that contacts the pulpis lined with stainless steel.
2.The rotor and the knives are all 304 stainless steel, and the shaft ends of the rotor are made of #45 steel through quenching and tempering, and dynamic balance correction is performed.
3.Bearings are produced by Wafangdian or Luoyang Bearing Factory.
4.The sieve plate is 304 stainless steel CNC laser processing.
5.Scope of supply: host, triangle belt, motor, motor wheel, motor base plate, anchor screw
Features
1.Less fiber in the reject after this equipment, no water basically, to reduce reject handing cost in the following procedure.
2.Low friction force due to special rotor design, guarantee rejecting integrity, to separate reject and stock efficiently.
3.Open-type upper cover for more simple and easy maintenance.
4.Equipped with washing pipe, to reduce basket plugging and fiber loss.
2.Low friction force due to special rotor design, guarantee rejecting integrity, to separate reject and stock efficiently.
3.Open-type upper cover for more simple and easy maintenance.
4.Equipped with washing pipe, to reduce basket plugging and fiber loss.
| Model | 480 |
| Rotor specification | 480mm |
| Pulp inlet concentration | 1-3.5% |
| Slag discharge concentration | 15-20% |
| Diameter of screen hole | 2-3.5mm |
| Capacity | 40-50T/D |
| Motor | 55KW |
