Audited Supplier
NN3007K
Taper Roller
Provided
ISO 9001
Chrome Steel Gcr15/Nylon Cage Steel/Stainless Stee
Steel Cage.Copper Cage.Nylon Cage
Machinery Repair, Restaurant Metallurgy. Agri
Industries. Car. Fan. Gearbox
0-15days
Grease or Oil
OEM ODM
Factory Wholesale Price
High Quality 100% Tested
P6
Large
YZC
Single Box
Standard, if you need a special size we can custom
China
848210
Product Description
Quality Assurance Cylindrical Roller Bearing NN3007K/W33 NN3007 N1008 NU1008M For Machinery Tool
A tapered roller bearing is a unit that consists of both tapered raceways (inner and outer rings), and tapered rollers.The load capacity can be increased or decreased depending on the contact angle being increased or decreased.
1. It is a separable bearing. The inner and outer rings of the bearing have tapered raceways, and the rollers are truncated cone-shaped. The roller and the raceway are in linear contact, which can bear heavier combined radial and axial loads, as well as axial loads. The larger the contact angle, the higher the axial bearing capacity; conversely, the smaller the contact angle, the lower the axial bearing capacity.
2. The design of the tapered roller should extend the contact line between the roller and the inner and outer raceways and then intersect at the same point on the bearing axis for rolling.
Benefits for Bearing
2. The design of the tapered roller should extend the contact line between the roller and the inner and outer raceways and then intersect at the same point on the bearing axis for rolling.
Benefits for Bearing
3. Tapered roller bearings can be divided into single row, double row and four row tapered roller bearings according to the number of rollers installed. This type of bearings also mostly use inch series products.
4. The newly designed tapered roller bearing adopts a reinforced structure, the diameter of the roller is lengthened, the length of the roller is lengthened, and the number of rollers increases. The use of convex rollers significantly improves the bearing capacity and service life of the bearing. The spherical and conical contact between the large end surface of the roller and the large rib is used to improve the lubrication
4. The newly designed tapered roller bearing adopts a reinforced structure, the diameter of the roller is lengthened, the length of the roller is lengthened, and the number of rollers increases. The use of convex rollers significantly improves the bearing capacity and service life of the bearing. The spherical and conical contact between the large end surface of the roller and the large rib is used to improve the lubrication
Part No & Size | Cylindrical Roller Bearing NN3007K/W33 NN3007 N1008 NU1008M |
Part Name | ROLLER BEARING |
Quality | ORIGINAL |
Place of Origin | CHINA |
Adaptable Automobile Mode | AvaILBLE |
Packing&Shipping | STANDARD PACKING |
Warranty | 12 MONTHS |
Certification | ISO9001:2008 |
MOQ | 1 PCS |
Delivery Time | 1-3 DAYS |
Payment | L/C,T/T,Western Union,PayPal,etc |
FOB Port | Qingdao,Tianjin,Shanghai etc |
Shipping Ways | DHL,TNT,EMS,FEDEX,UPS. |
| Selling Units | Single item |
| Single Unit Size | Cylindrical Roller Bearing NN3007K/W33(35*62*20) NN3007(35*62*20) N1008(40*68*15) NU1008M(40*68*15) |
| Single Gross Weight | Cylindrical Roller Bearing NN3007K/W33(0.254KG) NN3007(0.256KG) N1008(0.217KG) NU1008M(0.231KG) |
| Package Type | neutral packing carton for BEARING |
1. Q:How about your quality of bearings?
A:Our quality of bearings is based on ISO9001 and quality of bearing is our soul
2. Q. Can I get free samples for test from your company?
A: YES, contact us , Standard samples are available.
3. Q:How long is the lead time?
A: The lead time for sample order is 3-5 days, for bulk order is 5-15 days after receive the deposit
4. Q: Will you check the products before shipment?
A: Yes, We have a professional QC team. Products will be strictly inspection before shipment.
5. Q: What will you do if the customer are unsatisfied with the product? How long will you response for the problems?
A: If have any problem, just contact with us at first time, We will respond within 1 hour , within 24 hours will solve your problem
6.About after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:12 months warranty from the first day of receiving goods.
7.Q:shipping.
A.1) Less than 45 KGS, we will send by express Door to Door. Convenient ) 2) Between 45 - 200 KGS, we will send by air transport ( Fastest and safest, but expensive ) 3) More than 200 KGS, we will send by sea. ( cheapest, but long time )
8.Q:Do you accept ODM&OEM orders?
A.Yes, we provide ODM&OEM services to worldwide customers, we are able to customize housings in different styles, and sizes.we also customize circuit board & packaging box as per your requirements.
9.Q: What's the MOQ?
A.MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders
A:Our quality of bearings is based on ISO9001 and quality of bearing is our soul
2. Q. Can I get free samples for test from your company?
A: YES, contact us , Standard samples are available.
3. Q:How long is the lead time?
A: The lead time for sample order is 3-5 days, for bulk order is 5-15 days after receive the deposit
4. Q: Will you check the products before shipment?
A: Yes, We have a professional QC team. Products will be strictly inspection before shipment.
5. Q: What will you do if the customer are unsatisfied with the product? How long will you response for the problems?
A: If have any problem, just contact with us at first time, We will respond within 1 hour , within 24 hours will solve your problem
6.About after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:12 months warranty from the first day of receiving goods.
7.Q:shipping.
A.1) Less than 45 KGS, we will send by express Door to Door. Convenient ) 2) Between 45 - 200 KGS, we will send by air transport ( Fastest and safest, but expensive ) 3) More than 200 KGS, we will send by sea. ( cheapest, but long time )
8.Q:Do you accept ODM&OEM orders?
A.Yes, we provide ODM&OEM services to worldwide customers, we are able to customize housings in different styles, and sizes.we also customize circuit board & packaging box as per your requirements.
9.Q: What's the MOQ?
A.MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders
