Audited Supplier
Quick Robotic Iron Tips 911G Series for Quick Soldering Robot 911G-24DV1 Soldering Tips
Model: 911G-30DV2 Soldering Tips
Color: Black
Material: Copper, Iron, Chromium
Power: 30W, 40W, 60W
Voltage: AC110V/220V
Application: Quick Soldering Robot
Tips: Custom-made Service available
Sample: Available for free Features of 911G Series Soldering Robot Tips
Quick soldering tips Model variants:
911G-10PC 911G-13PC 911G-16PC 911G-20PC 911G-24PC 911G-30PC 911G-40PC
911G-16D 911G-20D 911G-24D 911G-30D 911G-40D
911G-16DV1 911G-20DV1 911G-24DV1 911G-30DV1 911G-40DV1
911G-16DV2 911G-20DV2 911G-24DV2 911G-30DV2 911G-40DV2
Applicable soldering Quick soldering robot Model:
Soldering Robot QUICK 9320A,QUICK9220A (D) ,QUICK9320A (D) ,QUICK9420A (D), QUICK 9434 / 9334 / 9333 / 9433,QUICK 9434 / 9334 / 9333 / 9433,QUICK 9220D / 9320D / 9420D Soldering Robot
| Soldering tips: | for Quick soldering robot replaceable tips |
| Shipping weight: | 0,01 Kg |
| Dimensions ( length ): | 4cm |
JNL has been specializing in soldering iron tip design and manufacturing for over 20 years, offering soldering tips to fit all of the most popular stations like Hakko, Weller, Pace, Apollo, JBC, QUICK, GOOT, UNIX & more! Long Life: Using a high-quality JNL soldering iron replacement tip increases solder speeds and decreases the total cost of manufacture. Higher temperatures and high tin content solders, common in lead-free solder processes, place additional strain on soldering iron tips. The long life of a JNL solder iron tip reduces tip changes, decreasing the total number of tips used and decreasing production time.
Rapid-Heat Recovery: JNL soldering tips are constructed from highly conductive premium grade copper to transmit heat to the work more quickly than other brands. This quick heat recovery enables more joints to be soldered per minute, thus reducing manufacturing time and costs.
Tip Shapes & Sizes for Every Application
JNL soldering tips are available in a wide variety of geometries including pointed / conical, blade/knife, chisel/screwdriver, and bevel. This allows you to solder fine contact areas, reach isolated areas on dense board designs, solder large pad areas, drag solder, or quickly remove solder with desoldering braid.
1 Made with pure oxygen-free copper
2 Long time electroplating makes the plating layer denser, the lifetime is longer than other tips
3 Short lead time for standard robot tips
4 The cost is much lower than the original tips
5 Custom made available
6 Offer sample for testing
* If the sponge cleaner is utilized, air-blow cleaning is normally not required.
Some applications require air-blow & sponge tip cleaning (depending upon tip type)
The standard cleaning duration is 0.5 second
The iron tip does not need to be extended if not required
The air-blow cup is not included with the standard Luna system
* If the tip is not "wetting" with solder (oxidation)
Remove pre-solder on tip completely.
Remove oxidation by sand paper after cooling down the iron tip to room temperature.
Turn on the power and apply solder on the iron tip during rising the temperature (manually).
The tip will wet with solder by the above process.
