Audited Supplier
STID-B Residual current Circuit Breaker(RCCB B model) using recharge station
General:
STID-B RCCB B model is worked on type A and in addition for smooth DC residual currents, residual DC currents that may results from rectifying circuits and high frequency AC residual currents.It protects in the event of contunuous fault current on three phase networks. It usually is used in the field of Recharging Station, Medical Apparatus and Instruments, Controllers and Variable Speed Drives, Batter Charges and Inverters(DC)...STID-B complys with IEC/EN61008 and IEC/EN62423 standards.
Roduct Over View:
1. Provide protection against earth fault/leakage current and function of isolation
2. High short-circuit current withstand capacity3. Applicable to terminal and pin/fork type busbar connection
5. Automatically disconnect the circuit when earth fault/leakage current occurs and exceeds the rated sensitivity
6. Independent of power supply and line voltage, and free from external interference, voltage fluctuation.
Specifications
| Electrical Feature | Standard | IEC/EN62423&IEC/EN61008-1 | |
| Type(wave form of the earth leakage sensed) | B | ||
| Rated current In | A | 25,40,63 | |
| Poles | P | 1P+N,3P+N | |
| Rated voltage Ue | V | IP+N:230/240V;3P+N:400/415V | |
| Rated sensitivity I n | A | 0.03,0.1,0.3 | |
| Insulation voltage Ui | V | 500 | |
| Rated residual making and | A | 500(In=25A/40A) | |
| breaking capacity I m | 630(In=63A) | ||
| Short-circuit current I c | A | 10000 | |
| SCPD fuse | A | 10000 | |
| Break time under I n | s | ≤0.1 | |
| Rated frequency | Hz | 50 | |
| Rated impulse withstand voltage(1.2/5.0)Uimp | V | 4000 | |
| MechanicaI features | Dielectric test voltage at ind. Fred. for 1min | kv | 2.5 |
| Pollution degree | 2 | ||
| Electrical life | 2000 | ||
| MechanicaI Iife | 10000 | ||
| Fault current indicator | Yes | ||
| Protection degree | IP20 | ||
| Ambient temperature(with daily average 35 ) | ºC | -40~+55ºC | |
| Storage temperature | ºC | -40~+70ºC |
FAQ
Q 1. what's the payment term?
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ?
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory
Q8. How many years experience ?
A.: Our teams have more than 20years' experience.
Q9: Warranty time ?
A: 18months.
