Audited Supplier
Radiomaster TX16S
Fpv Drone
Lipo Battery
Plastic
<50m
Button
Universal
RF Remote Control
RadioMaster
Standard Packing
287*129*184mm
8802200090
Product Description
RadioMaster TX16S MKII V4.0 Hall Gimbal 2.4G 16CH ELRS Transmitter Remote Controller for RC Drone
Product Description
SPECS
Size:287x129x184mm
Weight: 750g (without battery)
Transmission frequency: 2.400GHz-2.480GHZ
Transmitter module:
Gimbal: Option 1:V4.0 Hall sensor with Aluminium fascia
Option 2: AG01 CNC Hall sensor
Module Bay:IR compatible module bay
Upgrade method: supports UsB-c online /D card offline upgrade
Option 1:Internal 4-in-1 multi-protocol module
(CC2500 CYRF6936 A7105 NRF2401)
Option 2: Internal ELRS (SX1280)
Transmitting power:
Internal 4-in-1 multi-protocol module :Max 100mw
(protocol dependent)
Internal ELRS :Max 250mw
(transmitting power is adjustable)
Antenna gain:2db (transmit power adjustable)
Working current: 400mA
Working voltage: 6.6-8.4v DC
Remote controldistance:>2km@22dbm
Radio firmware: EdgeTX
Module Firmware:Multiprotocol-Module(4lN1)
OR-ExpresSLRS (ELRS)
Channels: Up to 16 channels(depending on the receiver)
Display: 4.3-inch TFT full-colour touch display with a
resolution of 480* 272
IMPROVEMENTS
lmproved internal circuity and optimized power supply
New charge circuitry with integrated reverse-polarity protection.
Optimized charge lC, better balancing and USB-C charge current management.
Rear mounted audio iack provides headohone output.
V4.0 Gimbal improved centring and temperature stability (Same circuitry as AG01)
Optional high/low rear grips included for improved ergonomics.
"lmproved S1/S2 knobs with clear centre-detents
.lmproved LS/RS Sliders with smoother feel and better centre-detents.
Redesigned battery cover for improved battery access
Retooled body shell with improved fit and finish.
Trainer socket changed to standard TRs 3.5mm socket.
Rear DlY Socket added for personalised mods
Improved internal plastics for better longevity
Available ELRS and 4in1 versions,
MAX units feature carbon look face plates and CNC finishing components and buttons
Packing and Shipping
Product Description
SPECS
Size:287x129x184mm
Weight: 750g (without battery)
Transmission frequency: 2.400GHz-2.480GHZ
Transmitter module:
Gimbal: Option 1:V4.0 Hall sensor with Aluminium fascia
Option 2: AG01 CNC Hall sensor
Module Bay:IR compatible module bay
Upgrade method: supports UsB-c online /D card offline upgrade
Option 1:Internal 4-in-1 multi-protocol module
(CC2500 CYRF6936 A7105 NRF2401)
Option 2: Internal ELRS (SX1280)
Transmitting power:
Internal 4-in-1 multi-protocol module :Max 100mw
(protocol dependent)
Internal ELRS :Max 250mw
(transmitting power is adjustable)
Antenna gain:2db (transmit power adjustable)
Working current: 400mA
Working voltage: 6.6-8.4v DC
Remote controldistance:>2km@22dbm
Radio firmware: EdgeTX
Module Firmware:Multiprotocol-Module(4lN1)
OR-ExpresSLRS (ELRS)
Channels: Up to 16 channels(depending on the receiver)
Display: 4.3-inch TFT full-colour touch display with a
resolution of 480* 272
IMPROVEMENTS
lmproved internal circuity and optimized power supply
New charge circuitry with integrated reverse-polarity protection.
Optimized charge lC, better balancing and USB-C charge current management.
Rear mounted audio iack provides headohone output.
V4.0 Gimbal improved centring and temperature stability (Same circuitry as AG01)
Optional high/low rear grips included for improved ergonomics.
"lmproved S1/S2 knobs with clear centre-detents
.lmproved LS/RS Sliders with smoother feel and better centre-detents.
Redesigned battery cover for improved battery access
Retooled body shell with improved fit and finish.
Trainer socket changed to standard TRs 3.5mm socket.
Rear DlY Socket added for personalised mods
Improved internal plastics for better longevity
Available ELRS and 4in1 versions,
MAX units feature carbon look face plates and CNC finishing components and buttons
Packing and Shipping