Audited Supplier
JHSW-8616
Compound
Polyurea
Optional
Liquid
Spray
ISO14001, RoHS, ISO9001
Steel
Film Forming Matter
Conversion Type
polysv
200L Drum
A side 220 kg, B side 200 kg
Qingdao, China
3909301000
Product Description
JHSW8616 Rapid Cure No Solvent Rigid Polyurea Coaing for Foam Sculpture is the state of the art 100% solids, ultra-fast cure, flexible, spray-applied, high build, and two components aromatic polyurea elastomer. JHSW8616 has excellent strength, abrasion resistance, substrate adhesion and impact resistance, it has high hardness, so that can be easily polished when spray on the foam sculpture.Advantages:
- Fast cure, short down time, no sagging
- 100% Solids, No VOC's, Odorless, No Toxic Vapors
- Good resistance to a wide range of chemical attack
- High impact and Abrasion Resistance
- Good weather ability
- High hardness, better protective for foam sculptures.
JHSW8616 Rapid Cure No Solvent Rigid Polyurea Coaing for Foam Sculpture can be widely used for protection of the foam sculptures, it will make the foam sculpture better impact resistance, anti-abrasion, and scratch resistant.
Properties:
| Tensile Strength /MPa | ≥20 | Solids Content/% | 100 |
| Elongation/% | ≥50 | VOC | 0 |
| Tear Strength/( N/mm) | ≥70 | Gel Time/s | 11-13 |
| Shore Hardness | ≥55D | Tack Free/ s | 20~30 |
| Adhesion /(Pull off, concrete,MPa) | ≥2.5 | Shelf Life | 12 months, unopened at 0~40 ºC |
| Density/( g/cm3) | 0.95~1.05 | Flash Point/ ºC | >100 |
| Abrasion Resistance /(GB/T 1689-1998, cm3/1.61km, g) | ≤0.04 | Mix Ratio V/V | 1: 1 |
| Impermeability(0.3MPa/30min) | Impervious | Recommended Spreading Thickness/mm | 2~3 |
| Chemical Resistance | No corrosion, No Blister, No Spalling | Colors: | Optional |
