Audited Supplier
Axial Plunger Pump
Single Cylinder
Hydraulic Driven Reciprocating Pump
Horizontal
Radial
Hydraulic
Pressureoil
Axial Flow
Ouster
Standard Export Wooden Case
A2FM10/12/16/23/28/32/45/56/63/80/90/200/500/1000
Made in China
8413503190
Product Description
| Product Number | Specifications | Working Pressure | Characteristic |
| A2FM | 10,12,16,23,28, 32,45,56,63,80,90, 107,125,160,180,200, 250,355,500,710,1000 | Common pressure: 35Mpa, Peak pressure: 40Mpa | The oblique axis axial quantitative motor is suitable for hydrostatic drive of open circuit. Applicable to the field of walking machinery or industry; The output flow is proportional to the driving speed and displacement. The design of the drive shaft bearing makes the application realm reach the expected service life. Various specifications can be matched with each actual drive. Favorable power/weight ratio; Compact structure and economy; Optimum volumetric efficiency; Integrated plunger design with plunger ring. |
| Safety instructions | |||
| 1, The A2FM motor is designed for use in an open loop. - The project planning, installation and commissioning of the axial plunger unit must be carried out by qualified personnel. ; | |||
| 2,Before using the axial plunger unit, please read the corresponding manual completely. If necessary, you can get it from Rexroth. - During and shortly after operation, there may be a risk of burning of the axial piston unit. ; | |||
| 3,Appropriate safety measures (such as wearing protective clothing) should be taken. - The characteristics of the axial plunger unit may vary with different working conditions (working pressure, oil temperature) of the axial plunger element, the characteristics may change. | |||
| Work Pipeline Oil Port | |||
| 1,Oil nozzles and fixed threads are designed for maximum prescribed pressure. Machine or system manufacturers must ensure that the safety factor of connecting components and pipes meets the specified working conditions (pressure, flow, hydraulic oil, temperature); | |||
| 2,Work pipeline nozzles and functional nozzles are only used in hydraulic pipelines; | |||
| 3,The data and instructions contained here must be followed; | |||
| 4,The product cannot be approved as a component that follows the general mechanical safety concept of ISO 13849; | |||
| Install bolts | |||
| 1,For installation bolts that meet the ISO metric thread standard of DIN 13 and the thread standard of ASME B1.1, we recommend that tightening torque be checked separately according to VDI 2230; | |||
