Audited Supplier
1. Specifications:
Torch Parameters | Standard GB/T15579.7-2013 | ||
Rated Current | 340A | Rated Load Duration | 60% |
Protective Gas Type | 340A CO2/ 320A Mix | Guiding Method | Manual |
Test Gas Flow | 10-25L/min | Voltage Rating | ≤113V |
Welding Method | MIG/MAG Welding | Rear Interface | Euro Type |
Length | 3M |
|
|
| |||
The torch is connected to the welding machine or control device. With different diameters of welding wire and contact tip, MIG/MAG welding can be done by protective cooling gas CO2 or mix air. | |||
2. Welding Torch Structure Diagram and List:
SN. | Part Number | Part Name | Quantity | Remark |
1 | ICS0656 | Smoke Remove Holder/FE340/Straight cylinder | 1 | |
| 2 | ICS0650 | Nozzle/FE340/Φ16 | 1 | |
| 3 | ICU0005-12 | Contact Tip 1.2/M8*30 | 1 | |
| 4 | ICK0686 | Insulation cylinder 3- 34A | 1 | |
| 5 | ICF0093 | Diffuser/FE340/M8 | 1 | |
| 6 | IZH0010 | Smoke remove pipe/FE340/Φ30 | 1 | |
| 7 | ICZ0609 | Torch neck/FE340/M10*1 | 1 | |
| 8 | ICV0068 | MIG handle/Black/PA66+30%GF/Smoking torch | 1 | |
| 9 | ICNxxxx | Cable assembly/42mmq/3M | 1 | |
| 10 | IHQ0070 | Torch trigger 21.8mm Red | 1 | |
| 11 | IFT8206 | hook/Q235/Smoking torch | 1 | |
| 12 | IIC0590-04 | Liner with insulation1,2-1,6 3.2M Yellow | 1 |
SFPG-20A
Performance Parameter | |||
Inspiratory Air Volume (m3/h) | 200±10 | Total Filtration Area (m2) | 6 |
Motor Power (Kw) | 0.8 | Compressed Air (Mpa) | 0.5-0.6 |
Fan negative Pressure (Pa) | 23000 | Gray drum Volume (L) | 5 |
Noise (dB)(A) | ≤70±5 | Cleaning Method | Automatic Cleaning |
| Voltage (V/Hz) | 220/50 | Control Section | Delixi Electric |
Equipment Dimensions (mm) | 570L x 290W x 500H | Equipment Weight (Kg) | 25±5 |
| Number of Filter Cartridges | 1 | Filtration Area (m2) | 6 |
| Filter Material | Polyester + Microporous Film | Filter Cartridge Size | 200x170 |
2. Structure Chart and List:
Q1: Can I have a sample for testing?
A: Yes, we can support sample. The sample will be charged reasonably according to the negotiation between us.
Q2: Can I add my logo on the boxes/cartons?
A: Yes, we have a R&D capability and professional & efficient team, OEM and ODM are available from us.
Q3: What are the benefits of being a distributor?
A: Special discount marketing protection.
Q4: How can you control the quality of products?
A: Yes, we have engineers ready to assist customers with technical support problems, any issues that may arise during the quoting or installation process, as well as aftermarket support.
Q5: Can we mix items in full container?
A: Yes. We ship our products in bulk, usually 40 feet high cube containers, but 20 feet containers are also acceptable.
Q6: Can I have a visit to your factory before the order?
A: Sure, welcome your visit to our factory.
