Audited Supplier
PET
on Line
60/80/100kg/150/200/320 Kgs/M3
2160X1000mm, 1080X1000mm
3-60mm
20*20/30*30mm
White
Plain Sheet/Double Cut/Perforated
Block Is Available
Pet
Sample Is Available
a Level
JLON
in Pallet/Carton
1250*1000mm
China
39211290
Product Description
Introduction:
PET structural foam has good specific stiffness, specific strength. Compression, tensile, shear and bending strengths are excellent.
PET foam core also has good dimensional stability and easy to process, suitable for a variety of processes. It is an ideal core material for lightweight & high-strength composite sandwich structures.
It provides excellent fatigue resistance, impact resistance and very low water absorption. Heat and sound insulation are also very good.
PET structural foam has good specific stiffness, specific strength. Compression, tensile, shear and bending strengths are excellent.
PET foam core also has good dimensional stability and easy to process, suitable for a variety of processes. It is an ideal core material for lightweight & high-strength composite sandwich structures.
It provides excellent fatigue resistance, impact resistance and very low water absorption. Heat and sound insulation are also very good.
Features:
High exothermic peak tempertaure resistance, up to 180C
High performance weight ratio, good impact resistance
Resistance to many chemicals, almost no water absorption
Low flammability, self-extinguishing from fire
Suitable for a variety of composite molding methods: Vacuum infusion, spray up, hand lay-up, vacuum bagging
Good impact strength
Low resin absorption
Good sound & thermal insulation
High exothermic peak tempertaure resistance, up to 180C
High performance weight ratio, good impact resistance
Resistance to many chemicals, almost no water absorption
Low flammability, self-extinguishing from fire
Suitable for a variety of composite molding methods: Vacuum infusion, spray up, hand lay-up, vacuum bagging
Good impact strength
Low resin absorption
Good sound & thermal insulation
Application:
marine, surface transport, aerospace, and wind energy industries
marine, surface transport, aerospace, and wind energy industries
Specifications:
| Item | Standard | Unit | P80 | P100 | P120 | P150 | P200 | P250 | |
| Density | ISO 845 | Kg/m3 | Average | 80 | 100 | 120 | 150 | 200 | 250 |
| Tolerance | -6,+9 | ±10 | ±10 | ±15 | ±20 | ±30 | |||
| Compression | ASTM D1621 | MPa | Average | 0.85 | 1.2 | 1.8 | 2.4 | 3.9 | 5.2 |
| Strength | Minimum | -0.8 | -1.1 | -1.55 | -2.2 | -3.4 | -4.8 | ||
| Compression Modulus | ASTM D 1621 | MPa | Average | 73 | 100 | 115 | 140 | 200 | 235 |
| Minimum | -65 | -90 | -105 | -125 | -170 | -210 | |||
| Tensile Strength | ASTM D 1623 | MPa | Average | 1.4 | 1.8 | 2.2 | 2.5 | 3.2 | 4 |
| Minimum | -1.3 | -1.6 | -1.9 | -2.2 | -2.6 | -3.6 | |||
| Tensile | ASTM D 1623 | MPa | Average | 90 | 110 | 120 | 160 | 210 | 275 |
| Modulus | Minimum | -80 | -100 | -105 | -130 | -180 | -250 | ||
| Shear | ASTM C 273 | MPa | Average | 0.55 | 0.8 | 0.9 | 1.25 | 1.7 | 2.05 |
| Strength | Minimum | -0.45 | -0.75 | -0.8 | -1.05 | -1.5 | -1.8 | ||
| Shear | ASTM C 273 | MPa | Average | 13.5 | 23 | 27 | 35 | 51 | 70 |
| Modulus | Minimum | -12.5 | -21 | -23 | -30 | -47 | -65 |
FAQQ1.Can your company customize products?
A: Yes, We usually discuss with customers and help them find solutions.
Q2. How can I get a sample from you to check quality?
A: Usually a sample will be prepared within one week after specification agreed.
Q3. What about your delivery time? Can we receive our goods on time?
A: Usually around 2-3 weeks after order confirmed. Exact delivery time depends on order quantity and Off-season/ busy season.
Q4. What is the Guarantee to buy your products? How to resolve quality complaints?
A: Offer TDS of each lot of production for confirmation before delivery.Once you have any quality problem, you can provide samples /pictures /test data. With our quality tracking system, we will give you feedback in short time. If the quality problem confirmed,we will send you replacement or make refund as you like.
Q5. What are your terms of payment?
A: Usually we do EXW, FOB, CIF, and DDU.
