Audited Supplier
Studded fin tube
Yes
1 Year
ISO, TUV
Heater
Recuperative Heat Exchanger
Steel Type
Steel
Ss,CS etc.
3.5-15
1000-1500
Studded
10-30
HAOHUA
Seaworthy Plywood + Iron Frame Packing
OD 1-15.75 Inch
China
84149090
Product Description
HAOHUA INDUSTRY offers the widest variety of sizes available in the industry. All of our products are domestically sourced, developed, and produced, which means our customers have immediate access to exactly the products they need for their particular application. And you are assured of the highest quality and manufacturing standards and a local, concerned, customer service presence.
Product Description
Round Tube Studded Fin Tube For Boiler Studded Pin Pipe
The studded fin tube is manufactured by Resistance Welding of Studs on the Bare tubes.
The fins are manufactured by welding of the fin material which is essential a stud or rod welded at base to the tube by electrical resistance process.
The current is made to flow through the tube and the base of the studs.The studs are specifically made in shapes to facilitate the welding process. The stud during the finning "welding " process is also mechanically pressed on the tube at the point of welding thence causing a very good mechanical bond. This type of Fin Tube find very good application in high pressure and high temperature applications. The mechanical bond is very strong and hence finds application in places where extreme mechanical load, stress is expected while during the process or cleaning etc.
These fin tubes find application in finned Pipes, air Coolers, heat exchangers etc and are preferred in Industries like
petrochemical refineries , power plants , chemical industries , steel plants , etc,
petrochemical refineries , power plants , chemical industries , steel plants , etc,
| Description | Tuba Material | Fin Material | Tube Size |
Studded Fin tube | All Kind of Material can be applied | Stainless Steel ,Carbon Steel or as your requirement | 12.7-406.4 |
| Heat Transfer Surface | Tubular Heat Exchanger | Origin | China |
| Transport Package | in Sea Worthy Iron Rack or as Your Requirement | Heat Transfer Surface | Tubular Heat Exchanger |
FAQ
Q1: What's the advantage of your company?
A: Our company specializes in trading for more than 13 years. We know how to solve any kinds of emergency accident during trading to give you a high quality and safety services . Choose the most suitable manufacture to satisfy your requirements is our goal.
Q2: I do not have experience to purchase from China before. How to start my first order?
A: It is easy and simple. Please feel free to contact with us. Experienced team is ready to help you step by step.
Q3: Can I get some samples?
A: Yes, we are honored to offer you samples for quality check.
Q4:How to confirm the quality ?
A: Third party inspection is warmly welcome before shipment. We have cooperated with SGS, CCIC,TECHNICO,BV,FIDES,etc.If you require the previous release notice issued by them,we would like to send you before order.
Q5: Is it possible to know how is my product going on without visiting your company?
A: We will offer a detailed products schedule and send weekly reports with digital pictures and videos which show the machining progress.
Q6: What is the production cycle?
A: It varies a lot depending on product dimension,technical,requirements and quantity. We always try to meet customers' requirement by adjusting workshop schedule.
Q7: What is your payment?
A: Normally, by T/T 30% down payment, 70% balance before shipment. 100% L/C at sight is also accepted by us.
