Audited Supplier
35221100
Natural Rubber
Industrial Rubber Slab, Industrial, Conveyor Belt Baffle Belt
Wear-resistant, Impact-resistant, Heat-resistant, Corrosion-resistant, Insulating, Cold-resistant, Antistatic
Natural Rubber, Pad
Natural Rubber + Polyurethane
Super Abrasion Resistant Polyurethane
Black Rubber Red Polyurethane
Wear-Resistant, Heat-Resistant, Tear-Resistant, Flame-Resistant, Cold-Resistant
Dual Seal, Rubber, Polyurethane Skirt, etc
Prevent Material and Dust Leakage
Wear Resistant Skirt Rubber
Conveyor Belt Skirt Rubber
15mm Thickness * 150mm /190mm Width * Length
Polyurethane, Rubber
Conveyor System, Belt Sealing System, etc
Prevent Material and Dust Leakage
Hot Vulcanizing
Handle Clamp / Bolt Clamp /Polyurethane Skirtboard
Bai-ott
Cartons on Pallet, Plywood Case
15mm thickness * 150mm /190mm width * length
China
3920999090
Product Description
Conveyor belt side skirt rubber manufacturer
Skirt rubber is used mainly in the mining industry as a side skirt on conveyor belt system.
Skirt rubber has a double layer of skirt rubber compound from polyurethane and rubber. The inner wear resistant of polyurethane exceeds the wear life of traditional rubber on skirting, whilst outer anti-dust integral molding can adapt to belt vibration and maintain the correct pressure to effectively seal the belt.
Natural rubber mixed with styrene-butadiene rubber will make skirt rubber more durable, increase its elasticity so that the sealing strip can be firmly attached to the conveyor belt.
Bai-ott's newly formula add semi-solidified lubricant to natural rubber, which solves the problem of high wear and tear and the belt easily damaged.
Advantage:
Reduce dust leakage
Polyurethane layer-high wear resistant
Low contact pressure
Protect conveyor belt and prolong service life
Custom service is available
| Color | OEM | |
| Polymer | DIN ISO 1629 | NR |
| Hardness | DIN ISO | 51 Shore A |
| Abrasion | DIN ISO | 160 mm³ |
| Specific Weight | DIN EN ISO 1183-1 | 1.11 g/cm³ |
| Tensile Strength | DIN 53 504 | 25 N/mm² |
| Elongation At Break | DIN 53 504 | 600% |
| Resilence Elasticity | DIN 53 512 | 70% |
| Tear Growth Resistance | ISO 34-1 Method A | 11 N/mm |
