Audited Supplier
Features of S6061-08~24 Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Torque 08-16-24NM
2 or 3 points control or Modulating
Actuator and damper shaft are bolt-on by screw.
Maximum round shaft φ16 and square shaft 12*12mm.
Direction of rotation can be setting.
Manual Override
With 2 auxiliary switches are optional
Power supply AC/DC 24V or AC 230V
Technical datasheet of S6061-08~24 Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Item | Unit | S6061-08DN(F) | S6061-16DN(F) | S6061-24DN/(F) |
Torque | Nm | 8 | 16 | 24 |
Damper area | m2 | 2 | 4 | 6 |
Running time | sec | 30~40 | 72~88 | 117~143 |
Power supply | V | 24VAC/DC;220VAC;110VAC | ||
Frequency | Hz | 50/60Hz 7.5W 50/60Hz | ||
Running consumption | W | 3.9W(24V);4.8W(230V) | ||
Maintaining consumption | W | 0.4W(24V);1.2W(230V) | ||
Weight | Kg | 1.25 | ||
Control signal | 2/3 point | |||
Position signal | 2 auxiliary switches | |||
Rotation angle | 0~90º(max 93°) | |||
Limited angle | 5~85º(per step 5º) | |||
Auxiliary switch rating | 3(1.5)Amp 250V | |||
Life cycle | >70000 cycles | |||
Noise level | 45dB(A) | |||
Protection level | IP44 or IP54 | |||
Ambient Temperature | -20~+50ºC | |||
Ambient Humidity | 5~95%RH | |||
Storage temperature | -40~+70ºC | |||
Certification | CE UL(Except 230V) | |||
Wiring diagram of S6061-08~24 Standard Damper Actuator (Non Fail-Safe Damper Actuators)
The damper actuator can be controlled by 2 or 3 point.
Auxiliary switch of S6061-08~24 Standard Damper Actuator (Non Fail-Safe Damper Actuators)
There are 2 auxiliary switches of the actuator, and you can set the angle 0-90° (the factory sets a is 10° and b is 80°). It will output a on/off signal when the actuator rotates the setting angle.
Control signal and choose the direction of rotation of S6061-08~24 Standard Damper Actuator (Non Fail-Safe Damper Actuators)
The direction of rotation changes according to the direction of pin.
Outline and dimension of S6061-08~24 Standard Damper Actuator (Non Fail-Safe Damper Actuators)
