Audited Supplier
FXM190812A
65997-19-5
7440-21-3
Stainless Steel
Saddle Ring Filler
Fxsino
Stamping
Free
Metal
Random Packing
Vocs Contorl
Exhaust Gas Treatment
FXSINO
Woven Bag/Ton Bag/ Pallet
38mm 50mm 76mm
Pingxiang, Jiangxi
8419909000
Product Description
Metal super saddle ring
FXSINO Metal Saddle Rings (similar to Koch INTALOX SADDLES) gives the best of both the worlds in terms of performance i.e. low-pressure drop and high efficiency. Hence FXSINO Metal Saddle Rings can be effectively used in both high pressures as well as vacuum towers. Some of its other advantages include large effective interfacial area, high mechanical strength (its monolithic construction overcomes the problem of "opening out" at ends as experienced in ring shaped packings) and low cost. FXSINO Metal Saddle Ring is available in various sizes, which give different combinations of efficiency and pressure drop.
FXSINO Metal Saddle Rings offer a 30% lower pressure drop than Pall Rings but with a lower liquid hold-up. This facilitates shorter packed bed heights. Metal Saddle Rings' physical shape permits maximum randomness and minimum alignment, Advanced design gives it a high rate of liquid film surface renewal producing a high mass transfer rate, leading to a greater capacity and efficiency compared to other random packings, Large number of contact points for homogenous distribution of liquid and gas, Facilitates shorter packed bed heights.
| Product Name | Shippment Packing IMTP SS316L 38mm Saddle Ring | |||
| Standard | HG/T 21554.2-5 | |||
| Punch Machine Accracy | GB 1804 IT13/GB 1184 B | |||
| Relevant Dpmestic Reference Standards | GB 3280, 1184, 1804, 708 | |||
| Suitable in International Standard | ||||
D*H*T mm | Surface Area m2/m3 | Void Ratio % | Packing Number Pieces/m3 | Packing Density Kg/m3 |
| 25*15*0.3 | 171 | 96.7 | 87220 | 161 |
| 38*16.5*0.4 | 123 | 97.7 | 38160 | 151 |
| 50*29*0.5 | 79 | 98.2 | 11310 | 129 |
| 76*35.5*0.8 | 55 | 97 | 4250 | 112 |
| The Equivalent of IMTP | ||||
Size mm | Surface Area m2/m3 | Void Ratio % | Packing Number Pieces/m3 | Packing Factor m-1 |
| 25 | 225.8 | 95.6 | 135000 | 41 |
| 38 | 150.8 | 97.7 | 50000 | 28 |
| 50 | 100 | 98 | 15000 | 18 |
| 70 | 60 | 98.5 | 4600 | 12 |
| Mainly Material | Carbon steel, stainless steel, Duplex stainless seteel, Nikel alloys, alumium, copper, copper alloys, tianium etc. | |||
| Feature | 1.Low pressure drop | |||
| 2.Good liquid/gas distribution | ||||
| 3.Easy wettable, high resistance to fouling | ||||
| 4. High mechanical strength | ||||
| Application | Widely used in all kinds of seperation,absorb plants,constant decompress plants,compounding ammonia plant,decarbonization,desulfuration,seperation of ethylbenzene,seperation of isooctane/methylbenzene,absorption,aeration,degassing,desorption,distillation,stripping,heat recovery,extration,various separation and absorption,such as NH3,H2S,SO2 etc | |||
